Dear hvaib...@ti.com, In message <1272034546-26041-5-git-send-email-hvaib...@ti.com> you wrote: > From: Vaibhav Hiremath <hvaib...@ti.com> > > This patch adds basic support for the AM3517EVM. > It includes: > - Board int file (.c and .h) > - Default configuration file > - Updates for Makefile > > Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> > Signed-off-by: Sanjeev Premi <pr...@ti.com> > --- > Makefile | 3 + > arch/arm/include/asm/arch-omap3/mux.h | 36 +++ > board/logicpd/am3517evm/Makefile | 47 ++++ > board/logicpd/am3517evm/am3517evm.c | 76 ++++++ > board/logicpd/am3517evm/am3517evm.h | 405 > +++++++++++++++++++++++++++++++++ > board/logicpd/am3517evm/config.mk | 30 +++ > include/configs/am3517_evm.h | 297 ++++++++++++++++++++++++ > 7 files changed, 894 insertions(+), 0 deletions(-) > create mode 100644 board/logicpd/am3517evm/Makefile > create mode 100644 board/logicpd/am3517evm/am3517evm.c > create mode 100644 board/logicpd/am3517evm/am3517evm.h > create mode 100644 board/logicpd/am3517evm/config.mk > create mode 100644 include/configs/am3517_evm.h
Entries to MAKEALL and MAINTAINERS missing. > diff --git a/Makefile b/Makefile > index 34f10ce..487ae73 100644 > --- a/Makefile > +++ b/Makefile > @@ -3169,6 +3169,9 @@ omap3_zoom1_config : unconfig > omap3_zoom2_config : unconfig > @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 > > +am3517_evm_config : unconfig > + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3 > + > smdkc100_config: unconfig > @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx Please keep list sorted. > diff --git a/arch/arm/include/asm/arch-omap3/mux.h > b/arch/arm/include/asm/arch-omap3/mux.h > index 0c01c73..8ea47b6 100644 > --- a/arch/arm/include/asm/arch-omap3/mux.h > +++ b/arch/arm/include/asm/arch-omap3/mux.h > @@ -283,6 +283,7 @@ > /*Control and debug */ > #define CONTROL_PADCONF_SYS_32K 0x0A04 > #define CONTROL_PADCONF_SYS_CLKREQ 0x0A06 > +#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08 > #define CONTROL_PADCONF_SYS_NIRQ 0x01E0 > #define CONTROL_PADCONF_SYS_BOOT0 0x0A0A > #define CONTROL_PADCONF_SYS_BOOT1 0x0A0C CONTROL_PADCONF_SYS_NIRQ looks out of place here. And all this asks to be converted into a proper C struct. > diff --git a/board/logicpd/am3517evm/Makefile > b/board/logicpd/am3517evm/Makefile > new file mode 100644 > index 0000000..3c71fef > --- /dev/null > +++ b/board/logicpd/am3517evm/Makefile ... > +include $(SRCTREE)/rules.mk > + > +sinclude $(obj).depend > + Don't add trailing empty lines. [Please check & fix globally.] Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Any sufficiently advanced technology is indistinguishable from magic. Clarke's Third Law - _Profiles of the Future_ (1962; rev. 1973) ``Hazards of Prophecy: The Failure of Imagination'' _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot