From: Claudiu Beznea <claudiu.bez...@microchip.com> Hi,
This series adds support for drive strength and slew rate support for Microchip SAMX60's pin controller. For drive strenght we could have 2 values: low, high. For slew rate we could have 2 values: enable, disabled. Thank you, Claudiu Beznea Claudiu Beznea (4): pinctrl: at91: add option to use drive strength bits pinctrl: at91: add drive strength support for SAM9X60 pinctrl: at91: add compatibles for SAM9X60 pin controller pinctrl: at91: add slewrate support for SAM9X60 drivers/pinctrl/pinctrl-at91.c | 84 +++++++++++++++++++++++++++++++++++--- include/dt-bindings/pinctrl/at91.h | 4 ++ 2 files changed, 83 insertions(+), 5 deletions(-) -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot