[U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswi...@toradex.com>

The implicit fallback mechanism for searching the whole MDIO bus for at
least one PHY has been gone with the following commit b882005a18de
("drivers/net/fec: phy_init: remove redundant logic"). This lead to the
Ethernet driver erroring out as follows:

Net:   Could not get PHY for FEC0: addr -19
eth-1: fec@400d1000
Colibri VFxx # dhcp
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
No ethernet found.
Could not get PHY for FEC0: addr -19
Colibri VFxx #

This commit adds an explicit PHY node which makes it work again.

Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>

---

 arch/arm/dts/vf-colibri.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
index 5ce17076e9..91ca4e4ddd 100644
--- a/arch/arm/dts/vf-colibri.dtsi
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -60,11 +60,24 @@
        status = "okay";
 };
 
+/* Ethernet */
 &fec1 {
        phy-mode = "rmii";
+       phy-handle = <&ethphy1>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_fec1>;
        status = "okay";
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ethphy1: ethernet-phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       max-speed = <100>;
+                       reg = <1>;
+               };
+       };
 };
 
 &i2c0 {
-- 
2.20.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot