Import the Linux device tree for the Gazerbeam board.
Signed-off-by: Mario Six <mario....@gdsys.cc>
---
arch/powerpc/dts/.gitignore | 1 +
arch/powerpc/dts/Makefile | 1 +
arch/powerpc/dts/gazerbeam.dts | 600 ++++++++++++++++++
arch/powerpc/dts/gdsys/gazerbeam-base.dtsi | 185 ++++++
arch/powerpc/dts/gdsys/mpc8308.dtsi | 354 +++++++++++
.../dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi | 6 +
.../powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi | 6 +
arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi | 5 +
.../gdsys/soc/nor/flash-80k-partition.dtsi | 20 +
9 files changed, 1178 insertions(+)
create mode 100644 arch/powerpc/dts/.gitignore
create mode 100644 arch/powerpc/dts/gazerbeam.dts
create mode 100644 arch/powerpc/dts/gdsys/gazerbeam-base.dtsi
create mode 100644 arch/powerpc/dts/gdsys/mpc8308.dtsi
create mode 100644 arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi
create mode 100644 arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi
create mode 100644 arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi
create mode 100644 arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi
diff --git a/arch/powerpc/dts/.gitignore b/arch/powerpc/dts/.gitignore
new file mode 100644
index 00000000000..b60ed208c77
--- /dev/null
+++ b/arch/powerpc/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index f080a968919..6a28f802c24 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -2,6 +2,7 @@
dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb
dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb
+dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb
targets += $(dtb-y)
diff --git a/arch/powerpc/dts/gazerbeam.dts b/arch/powerpc/dts/gazerbeam.dts
new file mode 100644
index 00000000000..a4408c496c8
--- /dev/null
+++ b/arch/powerpc/dts/gazerbeam.dts
@@ -0,0 +1,600 @@
+/*
+ * Gazerbeam CON Device Tree Source
+ *
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "gdsys/mpc8308.dtsi"
+
+/include/ "gdsys/gazerbeam-base.dtsi"
+
+/include/ "gdsys/soc/i2c/cirrus-audio-codec.dtsi"
+/include/ "gdsys/soc/i2c/dallas-rtc.dtsi"
+/include/ "gdsys/soc/lbc/gazerbeam.dtsi"
+/include/ "gdsys/soc/nor/flash-80k-partition.dtsi"
+
+&board_lbc {
+ FPGA0:iocon_uart@1,0 {
+ reg = <0x1 0x0 0x100000>;
+ little-endian;
+ interrupts = <48 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ FPGA1:iocon_uart@2,0 {
+ reg = <0x2 0x0 0x100000>;
+ little-endian;
+ interrupts = <17 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+};
+
+&FPGA0 {
+ compatible = "gdsys,iocon_fpga";
+ #gpio-cells = <2>;
+ gpio-controller;
+ bus = <&FPGA0BUS>;
+ unit_id = <0>;
+ fpga-type = <1>;
+ usb_base = <0x0080>;
+ audio_base = <0x0040>;
+ timebase_base = <0x013c>;
+
+ /*
+ * for every interrupt source there must be a dataset specifying
+ * 1. type (1: standard)
+ * 2. status register offset
+ * 3. mask register offset
+ * 4. default mask
+ */
+ fpga_interrupt_sources =
+ <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */
+ <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */
+ /*
+ * for every interrupt there must be a dataset specifying
+ * 1. type (1: status, 2: event)
+ * 2. interrupt source index
+ * 3. interrupt register bit
+ * 4. mask register bit
+ */
+ #fpga_interrupt_map-cells = <4>;
+ fpga_interrupt_map =
+ <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */
+ <1 0 0 0>, /* 1: VIDEO 0 */
+ <1 0 1 1>, /* 2: VIDEO 1 */
+ <1 0 2 2>, /* 3: VIDEO IC 0 */
+ <1 0 3 3>, /* 4: VIDEO IC 1 */
+ <1 0 4 4>, /* 5: IIC MAIN */
+ <1 0 6 6>, /* 6: IIC VIDEO 0 */
+ <1 0 7 7>, /* 7: IIC VIDEO 1 */
+ <1 1 0 0>, /* 8: OSD 0 */
+ <1 1 1 1>, /* 9: OSD 1 */
+ <1 1 2 2>, /* 10: SPDIF 0 */
+ <1 1 3 3>, /* 11: SPDIF 1 */
+ <1 0 12 12>, /* 12: COMM 0 */
+ <1 0 13 13>, /* 13: COMM 1 */
+ <1 0 10 10>, /* 14: COMM 2 */
+ <1 0 11 11>, /* 15: COMM 3 */
+ <2 0 5 5>, /* 16: MDIO */
+ <1 0 8 8>, /* 17: PHY */
+ <1 1 4 4>, /* 18: RS232 */
+ <1 1 5 5>, /* 19: AUDIO */
+ <1 1 8 8>, /* 20: PROC_AUDIO */
+ <1 1 7 7>, /* 21: USB/ETH-UART INT */
+ <2 1 10 10>, /* 22: AXI Bridge 0 */
+ <2 1 11 11>, /* 23: AXI Bridge 1 */
+ <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */
+ <>;
+};
+
+&FPGA1 {
+ compatible = "gdsys,iocon_fpga";
+ #gpio-cells = <2>;
+ gpio-controller;
+ bus = <&FPGA1BUS>;
+ unit_id = <1>;
+ fpga-type = <1>;
+ usb_base = <0x0070>;
+ audio_base = <0x0040>;
+ timebase_base = <0x013c>;
+
+ /*
+ * for every interrupt source there must be a dataset specifying
+ * 1. type (1: standard)
+ * 2. status register offset
+ * 3. mask register offset
+ * 4. default mask
+ */
+ fpga_interrupt_sources =
+ <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */
+ <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */
+ /*
+ * for every interrupt there must be a dataset specifying
+ * 1. type (1: status, 2: event)
+ * 2. interrupt source index
+ * 3. interrupt register bit
+ * 4. mask register bit
+ */
+ #fpga_interrupt_map-cells = <4>;
+ fpga_interrupt_map =
+ <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */
+ <1 0 0 0>, /* 1: VIDEO 0 */
+ <1 0 1 1>, /* 2: VIDEO 1 */
+ <1 0 2 2>, /* 3: VIDEO IC 0 */
+ <1 0 3 3>, /* 4: VIDEO IC 1 */
+ <1 0 4 4>, /* 5: IIC MAIN */
+ <1 0 6 6>, /* 6: IIC VIDEO 0 */
+ <1 0 7 7>, /* 7: IIC VIDEO 1 */
+ <1 1 0 0>, /* 8: OSD 0 */
+ <1 1 1 1>, /* 9: OSD 1 */
+ <1 1 2 2>, /* 10: SPDIF 0 */
+ <1 1 3 3>, /* 11: SPDIF 1 */
+ <1 0 12 12>, /* 12: COMM 0 */
+ <1 0 13 13>, /* 13: COMM 1 */
+ <1 0 10 10>, /* 14: COMM 2 */
+ <1 0 11 11>, /* 15: COMM 3 */
+ <2 0 5 5>, /* 16: MDIO */
+ <1 0 8 8>, /* 17: PHY */
+ <1 1 4 4>, /* 18: RS232 */
+ <1 1 5 5>, /* 19: AUDIO */
+ <1 1 8 8>, /* 20: PROC_AUDIO */
+ <1 1 7 7>, /* 21: USB/ETH-UART INT */
+ <2 1 10 10>, /* 22: AXI Bridge 0 */
+ <2 1 11 11>, /* 23: AXI Bridge 1 */
+ <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */
+ <>;
+};
+
+/ {
+ FPGA0BUS: fpga0bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x00002000>;
+
+ compatible = "gdsys,soc";
+
+ fpga0_rs232 {
+ compatible = "gdsys,ihs_trans_rs232";
+ reg = <0x50 0x08>;
+ little-endian;
+ };
+
+ fpga0_uart_usb {
+ compatible = "gdsys,ihs_simple_uart";
+ reg = <0xa0 0x08>;
+ little-endian;
+ fpga_interrupts = <21>;
+ line = <0>;
+ };
+
+ fpga0_iic_main {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x60 0x10>;
+ little-endian;
+ fpga_interrupts = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga0_dp_video0_redriver: fpga0_dp_video0_redriver {
+ compatible = "ti,sn75dp130";
+ reg = <0x2c>;
+ eq-i2c-enable = <3 2 1 0
+ 3 2 1 0
+ 3 2 1 0
+ 3 2 1 0>; /* 3.5 dB for all pe
values for all lanes */
+ };
+ fpga0_dp_video1_redriver: fpga0_dp_video1_redriver {
+ compatible = "ti,sn75dp130";
+ reg = <0x2e>;
+ eq-i2c-enable = <3 2 1 0
+ 3 2 1 0
+ 3 2 1 0
+ 3 2 1 0>; /* 3.5 dB for all pe
values for all lanes */
+ };
+ lm77@48 {
+ compatible = "national,lm77";
+ reg = <0x48>;
+ };
+ ads1015@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ };
+ ads1015@4b {
+ compatible = "ti,ads1015";
+ reg = <0x4b>;
+ };
+ };
+
+ fpga0_video0 {
+ compatible = "gdsys,ihs_video_out";
+ reg = <0x100 0x40>;
+ little-endian;
+ fpga_interrupts = <1 8>; /* VIDEO OSD */
+ osd_base = <0x180>;
+ osd_buffer_base = <0x1000>;
+ spdif_audio_base = <0x1e0>;
+ video_index = <0>;
+ video_id = <0>;
+ fpga-force-pos-pol;
+ sync-source;
+ fpga-pb-pixels = <2730>; /* 8192 / 3 */
+ fpga-ra-lines = <2>;
+ video_tx = <&fpga0_dp_video0>;
+ clk_gen = <&fpga0_video0_clkgen>;
+ ddc_ci = <&fpga0_dp_video0>;
+ };
+
+ fpga0_iic_video0 {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x1c0 0x10>;
+ little-endian;
+ fpga_interrupts = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga0_video0_clkgen: fpga0_video0_clkgen {
+ compatible = "idt,ics8n3qv01";
+ reg = <0x6e>;
+ channel = <0>;
+ };
+ };
+
+ fpga0_axi_video0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gdsys,ihs_axi";
+ reg = <0x170 0x10>;
+ little-endian;
+ fpga_interrupts = <22>;
+
+ fpga0_dp_video0: fpga0_dp_video0 {
+ compatible = "gdsys,logicore_dp_tx";
+ reg = <0x44a10000 0x1000>;
+ little-endian;
+ redriver = <&fpga0_dp_video0_redriver>;
+ video_id = <0>;
+ };
+ };
+
+ fpga0_video1 {
+ compatible = "gdsys,ihs_video_out";
+ reg = <0x200 0x40>;
+ little-endian;
+ fpga_interrupts = <2 9>; /* VIDEO OSD */
+ osd_base = <0x280>;
+ osd_buffer_base = <0x2000>;
+ spdif_audio_base = <0x2e0>;
+ video_index = <1>;
+ video_id = <1>;
+ fpga-force-pos-pol;
+ sync-source;
+ fpga-pb-pixels = <2730>; /* 8192 / 3 */
+ fpga-ra-lines = <2>;
+ video_tx = <&fpga0_dp_video1>;
+ clk_gen = <&fpga0_video1_clkgen>;
+ ddc_ci = <&fpga0_dp_video1>;
+ };
+
+ fpga0_iic_video1 {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x2c0 0x10>;
+ little-endian;
+ fpga_interrupts = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga0_video1_clkgen: fpga0_video1_clkgen {
+ compatible = "idt,ics8n3qv01";
+ reg = <0x6e>;
+ channel = <1>;
+ };
+ };
+
+ fpga0_axi_video1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gdsys,ihs_axi";
+ reg = <0x270 0x10>;
+ little-endian;
+ fpga_interrupts = <23>;
+
+ fpga0_dp_video1: fpga0_dp_video1 {
+ compatible = "gdsys,logicore_dp_tx";
+ reg = <0x44a10000 0x1000>;
+ little-endian;
+ redriver = <&fpga0_dp_video1_redriver>;
+ video_id = <1>;
+ };
+ };
+
+ fpga0_iic_usb {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0xb0 0x10>;
+ little-endian;
+ fpga_interrupts = <24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ fpga0_ep0 {
+ compatible = "gdsys,io-endpoint";
+ reg = < 0x020 0x10
+ 0x320 0x10
+ 0x340 0x10
+ 0x360 0x10>;
+ little-endian;
+ irq-model-local;
+ fpga_interrupts = <12 13 14 15>;
+ pollcycle = <200>;
+ nprot_channel = <16>;
+ uart_line = <0>;
+ ep_index = <0>;
+ line_protocol = <1>;
+ };
+
+ fpga0_mdio {
+ compatible = "gdsys,ihs_mdiomaster";
+ reg = <0x0058 0x10>;
+ little-endian;
+ fpga_interrupts = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga0_phy0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <0>;
+ };
+ fpga0_phy1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <1>;
+ };
+ fpga0_phy2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <2>;
+ };
+ fpga0_phy3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <3>;
+ };
+ };
+
+ };
+
+
+ FPGA1BUS: fpga1bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x00002000>;
+
+ compatible = "gdsys,soc";
+
+ fpga1_uart_usb {
+ compatible = "gdsys,ihs_simple_uart";
+ reg = <0xa0 0x08>;
+ little-endian;
+ fpga_interrupts = <21>;
+ line = <4>; /* TODO check and FIX */
+ };
+
+ fpga1_iic_main {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x60 0x10>;
+ little-endian;
+ fpga_interrupts = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga1_dp_video0_redriver: fpga1_dp_video0_redriver {
+ compatible = "ti,sn75dp130";
+ reg = <0x2c>;
+ eq-i2c-enable = <3 2 1 0
+ 3 2 1 0
+ 3 2 1 0
+ 3 2 1 0>; /* 3.5 dB for all pe
values for all lanes */
+ };
+ fpga1_dp_video1_redriver: fpga1_dp_video1_redriver {
+ compatible = "ti,sn75dp130";
+ reg = <0x2e>;
+ eq-i2c-enable = <3 2 1 0
+ 3 2 1 0
+ 3 2 1 0
+ 3 2 1 0>; /* 3.5 dB for all pe
values for all lanes */
+ };
+ lm77@48 {
+ compatible = "national,lm77";
+ reg = <0x48>;
+ };
+ ads1015@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ };
+ ads1015@4b {
+ compatible = "ti,ads1015";
+ reg = <0x4b>;
+ };
+ };
+
+ fpga1_video0 {
+ compatible = "gdsys,ihs_video_out";
+ reg = <0x100 0x40>;
+ little-endian;
+ fpga_interrupts = <1 8>; /* VIDEO OSD */
+ osd_base = <0x180>;
+ osd_buffer_base = <0x1000>;
+ spdif_audio_base = <0x1e0>;
+ video_index = <0>;
+ video_id = <4>;
+ fpga-force-pos-pol;
+ sync-source;
+ fpga-pb-pixels = <2730>; /* 8192 / 3 */
+ fpga-ra-lines = <2>;
+ video_tx = <&fpga1_dp_video0>;
+ clk_gen = <&fpga1_video0_clkgen>;
+ ddc_ci = <&fpga1_dp_video0>;
+ };
+
+ fpga1_iic_video0 {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x1c0 0x10>;
+ little-endian;
+ fpga_interrupts = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga1_video0_clkgen: fpga1_video0_clkgen {
+ compatible = "idt,ics8n3qv01";
+ reg = <0x6e>;
+ channel = <4>;
+ };
+ };
+
+ fpga1_axi_video0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gdsys,ihs_axi";
+ reg = <0x170 0x10>;
+ little-endian;
+ fpga_interrupts = <22>;
+
+ fpga1_dp_video0: fpga1_dp_video0 {
+ compatible = "gdsys,logicore_dp_tx";
+ reg = <0x44a10000 0x1000>;
+ little-endian;
+ redriver = <&fpga1_dp_video0_redriver>;
+ video_id = <4>;
+ };
+ };
+
+ fpga1_video1 {
+ compatible = "gdsys,ihs_video_out";
+ reg = <0x200 0x40>;
+ little-endian;
+ fpga_interrupts = <2 9>; /* VIDEO OSD */
+ osd_base = <0x280>;
+ osd_buffer_base = <0x2000>;
+ spdif_audio_base = <0x2e0>;
+ video_index = <1>;
+ video_id = <5>;
+ fpga-force-pos-pol;
+ sync-source;
+ fpga-pb-pixels = <2730>; /* 8192 / 3 */
+ fpga-ra-lines = <2>;
+ video_tx = <&fpga1_dp_video1>;
+ clk_gen = <&fpga1_video1_clkgen>;
+ ddc_ci = <&fpga1_dp_video1>;
+ };
+
+ fpga1_iic_video1 {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0x2c0 0x10>;
+ little-endian;
+ fpga_interrupts = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga1_video1_clkgen: fpga1_video1_clkgen {
+ compatible = "idt,ics8n3qv01";
+ reg = <0x6e>;
+ channel = <5>;
+ };
+ };
+
+ fpga1_axi_video1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "gdsys,ihs_axi";
+ reg = <0x270 0x10>;
+ little-endian;
+ fpga_interrupts = <23>;
+
+ fpga1_dp_video1: fpga1_dp_video1 {
+ compatible = "gdsys,logicore_dp_tx";
+ reg = <0x44a10000 0x1000>;
+ little-endian;
+ redriver = <&fpga1_dp_video1_redriver>;
+ video_id = <5>;
+ };
+ };
+
+ fpga1_iic_usb {
+ compatible = "gdsys,ihs_i2cmaster";
+ reg = <0xb0 0x10>;
+ little-endian;
+ fpga_interrupts = <24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ fpga1_ep0 {
+ compatible = "gdsys,io-endpoint";
+ reg = < 0x020 0x10
+ 0x320 0x10
+ 0x340 0x10
+ 0x360 0x10>;
+ little-endian;
+ irq-model-local;
+ fpga_interrupts = <12 13 14 15>;
+ pollcycle = <200>;
+ nprot_channel = <17>;
+ uart_line = <1>;
+ ep_index = <0>;
+ line_protocol = <1>;
+ };
+
+ fpga1_mdio {
+ compatible = "gdsys,ihs_mdiomaster";
+ reg = <0x0058 0x10>;
+ little-endian;
+ fpga_interrupts = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpga1_phy0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <0>;
+ };
+ fpga1_phy1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <1>;
+ };
+ fpga1_phy2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <2>;
+ };
+ fpga1_phy3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ device_type ="ethernet-phy";
+ reg = <3>;
+ };
+ };
+
+ };
+
+};
diff --git a/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi
b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi
new file mode 100644
index 00000000000..aca05f2cd08
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi
@@ -0,0 +1,185 @@
+/*
+ * Gazerbeam Device Tree Source
+ *
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "gdsys,gazerbeam";
+ compatible = "fsl,mpc8308rdb";
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+};
+
+&enet1 {
+ status = "okay";
+};
+
+&IIC {
+ fsl,preserve-clocking;
+
+ at97sc3205t@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+
+ lm77@48 {
+ compatible = "national,lm77";
+ reg = <0x48>;
+ };
+
+ ads1015@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ };
+
+ lm77@4a {
+ compatible = "national,lm77";
+ reg = <0x4a>;
+ };
+
+ emc2305@2e {
+ compatible = "smsc,emc2305";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2e>;
+ fan@0 {
+ reg = <0>;
+ };
+ fan@1 {
+ reg = <1>;
+ };
+ fan@2 {
+ reg = <2>;
+ };
+ fan@3 {
+ reg = <3>;
+ };
+ fan@4 {
+ reg = <4>;
+ };
+ };
+
+ emc2305@4c {
+ compatible = "smsc,emc2305";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4c>;
+ fan@0 {
+ reg = <0>;
+ };
+ fan@1 {
+ reg = <1>;
+ };
+ fan@2 {
+ reg = <2>;
+ };
+ fan@3 {
+ reg = <3>;
+ };
+ fan@4 {
+ reg = <4>;
+ };
+ };
+
+ at24c512@54 {
+ compatible = "atmel,24c512";
+ reg = <0x54>;
+ };
+
+ /* PPC-Board */
+ pca9698@22 {
+ compatible = "nxp,pca9698";
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ /* IO-Board */
+ pca9698@20 {
+ compatible = "nxp,pca9698";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&IIC2 {
+ fsl,preserve-clocking;
+
+ status = "okay";
+
+ /* MC2/SC-Board */
+ GPIO_VB0: pca9698@20 {
+ compatible = "nxp,pca9698";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ /* MC4-Board */
+ GPIO_VB1: pca9698@22 {
+ compatible = "nxp,pca9698";
+ reg = <0x22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&SPI {
+ gpios = < /*SPI-CSS-FPGA-U-FLASH#*/ &gpio0 8 0
+ /*SPI-CSS-FPGA-O-FLASH#*/ &gpio0 6 0
+ /*SPI-CSS-STDP1_U-FLASH#*/ &gpio0 12 0
+ /*SPI-CSS-STDP2_U-FLASH#*/ &gpio0 11 0
+ /*SPI-CSS-STDP1_O-FLASH#*/ &gpio0 15 0
+ /*SPI-CSS-STDP2_O-FLASH#*/ &gpio0 3 0>;
+
+ m25p16@0 {
+ compatible = "st,n25q128a11";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+ };
+
+ m25p16@1 {
+ compatible = "st,n25q128a11";
+ reg = <0x1>;
+ spi-max-frequency = <20000000>;
+ };
+
+ m25p16@2 {
+ compatible = "st,m25p40";
+ reg = <0x2>;
+ spi-max-frequency = <20000000>;
+ };
+
+ m25p16@3 {
+ compatible = "st,m25p40";
+ reg = <0x3>;
+ spi-max-frequency = <20000000>;
+ };
+
+ m25p16@4 {
+ compatible = "st,m25p40";
+ reg = <0x4>;
+ spi-max-frequency = <20000000>;
+ };
+
+ m25p16@5 {
+ compatible = "st,m25p40";
+ reg = <0x5>;
+ spi-max-frequency = <20000000>;
+ };
+};
diff --git a/arch/powerpc/dts/gdsys/mpc8308.dtsi
b/arch/powerpc/dts/gdsys/mpc8308.dtsi
new file mode 100644
index 00000000000..23e7403d911
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/mpc8308.dtsi
@@ -0,0 +1,354 @@
+/*
+ * Basic platform for gdsys mpc8308 based devices
+ *
+ * (C) Copyright 2014
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ * based on mpc8308rdb
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, ya...@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/memory/mpc83xx-sdram.h>
+
+/ {
+ compatible = "fsl,mpc8308rdb";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8308@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ board_lbc: localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ board_soc: immr@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8308-immr", "simple-bus";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ memory@2000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc83xx-mem-controller";
+ reg = <0x2000 0x1000>;
+ device_type = "memory";
+
+ driver_software_override = <DSO_ENABLE>;
+ p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>;
+ n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>;
+ odt_termination_value = <ODT_TERMINATION_150_OHM>;
+ ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>;
+
+ clock_adjust = <CLOCK_ADJUST_05>;
+
+ read_to_write = <0>;
+ write_to_read = <0>;
+ read_to_read = <0>;
+ write_to_write = <0>;
+ active_powerdown_exit = <2>;
+ precharge_powerdown_exit = <6>;
+ odt_powerdown_exit = <8>;
+ mode_reg_set_cycle = <2>;
+
+ precharge_to_activate = <2>;
+ activate_to_precharge = <6>;
+ activate_to_readwrite = <2>;
+ mcas_latency = <CASLAT_40>;
+ refresh_recovery = <17>;
+ last_data_to_precharge = <2>;
+ activate_to_activate = <2>;
+ last_write_data_to_read = <2>;
+
+ additive_latency = <0>;
+ mcas_to_preamble_override = <READ_LAT_PLUS_1_2>;
+ write_latency = <3>;
+ read_to_precharge = <2>;
+ write_cmd_to_write_data = <CLOCK_DELAY_1_2>;
+ minimum_cke_pulse_width = <3>;
+ four_activates_window = <5>;
+
+ self_refresh = <SREN_ENABLE>;
+ sdram_type = <TYPE_DDR2>;
+ databus_width = <DATA_BUS_WIDTH_32>;
+
+ force_self_refresh = <MODE_NORMAL>;
+ dll_reset = <DLL_RESET_ENABLE>;
+ dqs_config = <DQS_TRUE>;
+ odt_config = <ODT_ASSERT_READS>;
+ posted_refreshes = <1>;
+
+ refresh_interval = <2084>;
+ precharge_interval = <256>;
+
+ sdmode = <0x0242>;
+ esdmode = <0x0440>;
+
+ ram@0 {
+ reg = <0x0 0x0 0x8000000>;
+ compatible = "nanya,nt5tu64m16hg";
+
+ odt_rd_cfg = <ODT_RD_NEVER>;
+ odt_wr_cfg = <ODT_WR_ONLY_CURRENT>;
+ bank_bits = <3>;
+ row_bits = <13>;
+ col_bits = <10>;
+ };
+ };
+
+ IIC:i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ IIC2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ status = "disabled";
+ };
+
+ SPI:spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ sdhc@2e000 {
+ compatible = "fsl,esdhc", "fsl,mpc8308-esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <42 0x8>;
+ interrupt-parent = <&ipic>;
+ sdhci,auto-cmd12;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <133333333>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ gpio0: gpio@c00 {
+ #gpio-cells = <2>;
+ device_type = "gpio";
+ compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x18>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ ipic-msi@7c0 {
+ compatible = "fsl,ipic-msi";
+ reg = <0x7c0 0x40>;
+ msi-available-ranges = <0x0 0x100>;
+ interrupts = < 0x43 0x8
+ 0x4 0x8
+ 0x51 0x8
+ 0x52 0x8
+ 0x56 0x8
+ 0x57 0x8
+ 0x58 0x8
+ 0x59 0x8 >;
+ interrupt-parent = < &ipic >;
+ };
+
+ dma@2c000 {
+ compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ reg = <0x2c000 0x1800>;
+ interrupts = <3 0x8
+ 94 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x24000 0x1000>;
+
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar", "fsl,tsec";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ interrupt-parent = <&ipic>;
+ tbi-handle = < &tbi0 >;
+ phy-handle = < &phy1 >;
+ fsl,magic-packet;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@0 {
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar", "fsl,tsec";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = < &phy2 >;
+ status = "disabled";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+ };
+
+ pci0: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+ reg = <0xe0009000 0x00001000
+ 0xb0000000 0x01000000>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+ bus-range = <0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0 0 0 1 &ipic 1 8
+ 0 0 0 2 &ipic 1 8
+ 0 0 0 3 &ipic 1 8
+ 0 0 0 4 &ipic 1 8>;
+ interrupts = <0x1 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <0>;
+
+ pcie@0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ reg = <0 0 0 0 0>;
+ ranges = <0x02000000 0 0xa0000000
+ 0x02000000 0 0xa0000000
+ 0 0x10000000
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00800000>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi
b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi
new file mode 100644
index 00000000000..9787e096483
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi
@@ -0,0 +1,6 @@
+&IIC {
+ cs4265@4f {
+ compatible = "cirrus,cs4265";
+ reg = <0x0000004f>;
+ };
+};
diff --git a/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi
b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi
new file mode 100644
index 00000000000..336bdcaf2e3
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi
@@ -0,0 +1,6 @@
+&IIC {
+ ds1339@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
diff --git a/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi
b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi
new file mode 100644
index 00000000000..5ff58c28e50
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi
@@ -0,0 +1,5 @@
+&board_lbc {
+ ranges = <0x0 0x0 0xfe000000 0x00800000
+ 0x1 0x0 0xe0600000 0x00003000
+ 0x2 0x0 0xe0700000 0x00003000>;
+};
diff --git a/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi
b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi
new file mode 100644
index 00000000000..c6cc1409e0d
--- /dev/null
+++ b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi
@@ -0,0 +1,20 @@
+&board_lbc {
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x100000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x80000>;
+ };
+ env@80000 {
+ reg = <0x80000 0x10000>;
+ };
+ env1@90000 {
+ reg = <0x90000 0x10000>;
+ };
+ };
+};
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
