Hi Urja, Am Freitag, 22. März 2019, 20:14:32 CET schrieb Urja Rannikko: > Just saying: I'm not familiar with this stuff so i might've misunderstood > something in my commit messages, but anyways i managed to make it boot. > > There's more stuff than just these, but i decided I'd keep it short... > If you want to know my full setup, you can check out my gh repo for now: > https://github.com/urjaman/u-boot/commits/c201-stuff > > Notably I did include http://patchwork.ozlabs.org/patch/1040541/ in my > tree when testing (rk3288 pinctrl patch that was linked to on > the previous thread i found about the veyron speedy being broken). > > The one thing that I havent yet fixed is that the USB host port on > the otg-capable controller (near screen) doesn't work - one guess i have > is that the dwc2 host driver doesn't force it into host mode... > (It doesn't even read dr_mode ...) > > Urja Rannikko (4): > pinctrl: exit pinconfig_post_bind if there are no subnodes > rk3288-board: remove pinctrl call for debug uart > rk3288-board: cosmetic: document selecting RK PWM > dw_mmc: turn on the IO supply
In my u-boot list archive I only see the list itself als recipient. You may want to resend your series with actual maintainers in Cc so that they actually see your patches :-) . Similar to the kernel, uboot also has a scripts/get_maintainer.pl script to give you a list of applicable maintainers (Philipp and Simon in this case) Heiko _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot