> From: Stefan Agner <stefan.ag...@toradex.com> > The DDR validation tool (which is part of Processor Expert) allows > to evaluate leveling parameters for CR105/CR106/CR110. Several > runs have been made with Colibri VF50 and VF61 and it seems to > evaluate very similar values. Use this values by default. > Note: The newly evaluated parameters seem to require CTLUPD_AREF > to be enabled! > Note 2: The tool also evaluated 6 as a new value for PHY02/18 > GATE_CFG (Coarse adjust of gate open time). However, this seems > not to work in practise. > Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> > Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Applied to u-boot-imx, -next, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
