The fsl esdhc driver was the only mmc driver that could be enabled if
mmc support was off. It does not appear to compile in such a
configuration.
Move it to be inside the "if" that makes it conditional on MMC support.
It's still possible to turn off DM_MMC and enable the driver.
It looks like a rebase mistake in the original commit that added it, as
it would behaved as expected if just moved up a bit in the file.
Cc: Peng Fan <peng....@nxp.com>
Cc: Mario Six <mario....@gdsys.cc>
Cc: Jaehoon Chung <jh80.ch...@samsung.com>
Signed-off-by: Trent Piepho <tpie...@impinj.com>
---
drivers/mmc/Kconfig | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 496b2cba64..08c2dd2541 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -619,6 +619,12 @@ config MMC_MTK
This is needed if support for any SD/SDIO/MMC devices is required.
If unsure, say N.
+config FSL_ESDHC
+ bool "Freescale/NXP eSDHC controller support"
+ help
+ This selects support for the eSDHC (enhanced secure digital host
+ controller) found on numerous Freescale/NXP SoCs.
+
endif
config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
@@ -632,12 +638,6 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
TODO(marcel.ziswi...@toradex.com): Move to device tree controlled
approach once proper kernel integration made it mainline.
-config FSL_ESDHC
- bool "Freescale/NXP eSDHC controller support"
- help
- This selects support for the eSDHC (enhanced secure digital host
- controller) found on numerous Freescale/NXP SoCs.
-
endmenu
config SYS_FSL_ERRATUM_ESDHC111
--
2.14.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
