The Kconfig help has not been updated while adding PCA9547 and PCA9646.
Signed-off-by: Luca Ceresoli <l...@lucaceresoli.net>
---
Changes v1 -> v2:
- add missing comma (Michal)
- reword and rewrap the sentence
---
drivers/i2c/muxes/Kconfig | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index b0da67ce2c6b..4a601c88b78f 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -29,11 +29,11 @@ config I2C_MUX_PCA954x
tristate "TI PCA954x I2C Mux/switches"
depends on I2C_MUX
help
- If you say yes here you get support for the TI PCA954x
- I2C mux/switch devices. It is x width I2C multiplexer which enables to
- partitioning I2C bus and connect multiple devices with the same
address
- to the same I2C controller where driver handles proper routing to
- target i2c device. PCA9544 and PCA9548 are supported.
+ If you say yes here you get support for the TI PCA954x I2C mux/switch
+ devices. It is x width I2C multiplexer which enables to partitioning
+ I2C bus and connect multiple devices with the same address to the same
+ I2C controller where driver handles proper routing to target i2c
+ device. Supported chips are PCA9544, PCA9547, PCA9548 and PCA9646.
config I2C_MUX_GPIO
tristate "GPIO-based I2C multiplexer"
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
