Add initial support for Nanopc T4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)

Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Note: Hardware on the way, since it shared same DDR with Nanopi M4
I'm confident it will boot.

 arch/arm/dts/Makefile                     |  1 +
 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi |  7 ++
 arch/arm/dts/rk3399-nanopc-t4.dts         | 91 +++++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS     |  6 ++
 configs/nanopc-t4-rk3399_defconfig        | 58 +++++++++++++++
 5 files changed, 163 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
 create mode 100644 configs/nanopc-t4-rk3399_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d2ac26b556..e048565bb6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
        rk3399-evb.dtb \
        rk3399-firefly.dtb \
        rk3399-gru-bob.dtb \
+       rk3399-nanopc-t4.dtb \
        rk3399-nanopi-m4.dtb \
        rk3399-orangepi.dtb \
        rk3399-puma-ddr1333.dtb \
diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi 
b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
new file mode 100644
index 0000000000..1173d496ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <ja...@amarulasolutions.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts 
b/arch/arm/dts/rk3399-nanopc-t4.dts
new file mode 100644
index 0000000000..84433cf02b
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+       model = "FriendlyElec NanoPC-T4";
+       compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+       vcc12v0_sys: vcc12v0-sys {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-max-microvolt = <12000000>;
+               regulator-min-microvolt = <12000000>;
+               regulator-name = "vcc12v0_sys";
+       };
+
+       vcc5v0_host0: vcc5v0-host0 {
+               compatible = "regulator-fixed";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-name = "vcc5v0_host0";
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       adc-keys {
+               compatible = "adc-keys";
+               io-channels = <&saradc 1>;
+               io-channel-names = "buttons";
+               keyup-threshold-microvolt = <1800000>;
+               poll-interval = <100>;
+
+               recovery {
+                       label = "Recovery";
+                       linux,code = <KEY_VENDOR>;
+                       press-threshold-microvolt = <18000>;
+               };
+       };
+
+       ir-receiver {
+               compatible = "gpio-ir-receiver";
+               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&ir_rx>;
+       };
+};
+
+&pinctrl {
+       ir {
+               ir_rx: ir-rx {
+                       /* external pullup to VCC3V3_SYS, despite being 1.8V :/ 
*/
+                       rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+               };
+       };
+};
+
+&sdhci {
+       mmc-hs400-1_8v;
+       mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+       phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+       phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+       vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+       vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+       enable-active-high;
+       gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+       vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS 
b/board/rockchip/evb_rk3399/MAINTAINERS
index ae43805a6a..5917abb9c1 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@ F:      include/configs/evb_rk3399.h
 F:      configs/evb-rk3399_defconfig
 F:      configs/firefly-rk3399_defconfig
 
+NANOPC-T4
+M:     Jagan Teki <ja...@amarulasolutions.com>
+S:     Maintained
+F:     configs/nanopic-t4-rk3399_defconfig
+F:     arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
+
 NANOPI-M4
 M:     Jagan Teki <ja...@amarulasolutions.com>
 S:     Maintained
diff --git a/configs/nanopc-t4-rk3399_defconfig 
b/configs/nanopc-t4-rk3399_defconfig
new file mode 100644
index 0000000000..7ba4f85485
--- /dev/null
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names 
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
-- 
2.18.0.321.gffc6fa0e3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to