From: Steffen Dirkwinkel <s.dirkwin...@beckhoff.com>
These mmc functions were not used anymore since DM_MMC was introduced.
Acked-by: Patrick Bruenn <p.bru...@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwin...@beckhoff.com>
---
board/beckhoff/mx53cx9020/mx53cx9020.c | 55 --------------------------
1 file changed, 55 deletions(-)
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c
b/board/beckhoff/mx53cx9020/mx53cx9020.c
index fdef4477d9a..de1d85f1518 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -9,7 +9,6 @@
#include <common.h>
#include <dm.h>
-#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
@@ -20,11 +19,8 @@
#include <ACEX1K.h>
#include <netdev.h>
#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
#include <asm/gpio.h>
#include <input.h>
-#include <fs.h>
#include <dm/platform_data/serial_mxc.h>
enum LED_GPIOS {
@@ -148,57 +144,6 @@ int board_ehci_hcd_init(int port)
}
#endif
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
- {MMC_SDHC1_BASE_ADDR},
- {MMC_SDHC2_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret;
-
- gpio_request(GPIO_SD1_CD, "GPIO_SD1_CD");
- gpio_request(GPIO_SD2_CD, "GPIO_SD2_CD");
- gpio_direction_input(GPIO_SD1_CD);
- gpio_direction_input(GPIO_SD2_CD);
-
- if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- ret = !gpio_get_value(GPIO_SD1_CD);
- else
- ret = !gpio_get_value(GPIO_SD2_CD);
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- u32 index;
- int ret;
-
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-
- for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
- switch (index) {
- case 0:
- break;
- case 1:
- break;
- default:
- printf("Warning: you configured more ESDHC
controller(%d) as supported by the board(2)\n",
- CONFIG_SYS_FSL_ESDHC_NUM);
- return -EINVAL;
- }
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-#endif
static int power_init(void)
{
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
