From: Marcel Ziswiler <marcel.ziswi...@toradex.com>

Migrate pinctrl and regulators to device tree resp. driver model:
Ethernet, NAND and UART.
Drop BOARD_EARLY_INIT_F as it is anyway no longer used.
Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com>

---

Changes in v3: None
Changes in v2:
- Added Igor's reviewed-by.

 .../toradex/colibri-imx6ull/colibri-imx6ull.c | 82 ++-----------------
 configs/colibri-imx6ull_defconfig             |  5 +-
 2 files changed, 10 insertions(+), 77 deletions(-)

diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c 
b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index f1d5cc6655..8493b1dfdd 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2018 Toradex AG
+ * Copyright (C) 2018-2019 Toradex AG
  */
 #include <common.h>
+
 #include <asm/arch/clock.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/imx-regs.h>
@@ -14,7 +15,6 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/io.h>
-#include <common.h>
 #include <dm.h>
 #include <dm/platform_data/serial_mxc.h>
 #include <fdt_support.h>
@@ -28,25 +28,16 @@
 #include <netdev.h>
 #include <usb.h>
 #include <usb/ehci-ci.h>
+
 #include "../common/tdx-common.h"
 #include "../common/tdx-cfg-block.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                  \
-       PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
-       PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |                   \
        PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm |                 \
        PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                  \
-       PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define ENET_PAD_CTRL_MII  (PAD_CTL_DSE_40ohm)
-
-#define ENET_RX_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm)
-
 #define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
                PAD_CTL_DSE_48ohm)
 
@@ -65,13 +56,6 @@ int dram_init(void)
        return 0;
 }
 
-static iomux_v3_cfg_t const uart1_pads[] = {
-       MX6_PAD_UART1_TX_DATA__UART1_DTE_RX     | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_UART1_RX_DATA__UART1_DTE_TX     | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_UART1_RTS_B__UART1_DTE_CTS      | MUX_PAD_CTRL(UART_PAD_CTRL),
-       MX6_PAD_UART1_CTS_B__UART1_DTE_RTS      | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 #ifdef CONFIG_FSL_ESDHC
 static iomux_v3_cfg_t const usdhc1_pads[] = {
        MX6_PAD_SD1_CLK__USDHC1_CLK     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -90,31 +74,12 @@ static iomux_v3_cfg_t const usb_cdet_pads[] = {
 };
 
 #ifdef CONFIG_NAND_MXS
-static iomux_v3_cfg_t const gpmi_pads[] = {
-       MX6_PAD_NAND_DATA00__RAWNAND_DATA00     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA01__RAWNAND_DATA01     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA02__RAWNAND_DATA02     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA03__RAWNAND_DATA03     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA04__RAWNAND_DATA04     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA05__RAWNAND_DATA05     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA06__RAWNAND_DATA06     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_DATA07__RAWNAND_DATA07     | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_CLE__RAWNAND_CLE           | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_ALE__RAWNAND_ALE           | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_RE_B__RAWNAND_RE_B         | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_WE_B__RAWNAND_WE_B         | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B       | MUX_PAD_CTRL(NAND_PAD_CTRL),
-       MX6_PAD_NAND_READY_B__RAWNAND_READY_B   | 
MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
-};
-
 static void setup_gpmi_nand(void)
 {
-       imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
-
        setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
                          (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
 }
-#endif
+#endif /* CONFIG_NAND_MXS */
 
 #ifdef CONFIG_VIDEO_MXS
 static iomux_v3_cfg_t const lcd_pads[] = {
@@ -170,31 +135,6 @@ static int setup_lcd(void)
 }
 #endif
 
-#ifdef CONFIG_FEC_MXC
-static iomux_v3_cfg_t const fec2_pads[] = {
-       MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2            | 
MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
-       MX6_PAD_GPIO1_IO06__ENET2_MDIO                  | 
MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
-       MX6_PAD_GPIO1_IO07__ENET2_MDC                   | 
MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
-       MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00           | 
MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-       MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01           | 
MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-       MX6_PAD_ENET2_RX_ER__ENET2_RX_ER                | 
MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-       MX6_PAD_ENET2_RX_EN__ENET2_RX_EN                | 
MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
-       MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00           | 
MUX_PAD_CTRL(ENET_PAD_CTRL),
-       MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01           | 
MUX_PAD_CTRL(ENET_PAD_CTRL),
-       MX6_PAD_ENET2_TX_EN__ENET2_TX_EN                | 
MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-static void setup_iomux_fec(void)
-{
-       imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
-}
-#endif
-
-static void setup_iomux_uart(void)
-{
-       imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
 #ifdef CONFIG_FSL_ESDHC
 
 #define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0)
@@ -247,20 +187,17 @@ int board_mmc_init(bd_t *bis)
 #endif
 
 #ifdef CONFIG_FEC_MXC
-
 static int setup_fec(void)
 {
        struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
        int ret;
 
-       setup_iomux_fec();
-
        /* provide the PHY clock from the i.MX 6 */
        ret = enable_fec_anatop_clock(1, ENET_50MHZ);
        if (ret)
                return ret;
 
-       /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */
+       /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */
        clrsetbits_le32(&iomuxc_regs->gpr[1],
                        IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK,
                        IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
@@ -277,14 +214,7 @@ int board_phy_config(struct phy_device *phydev)
                phydev->drv->config(phydev);
        return 0;
 }
-#endif
-
-int board_early_init_f(void)
-{
-       setup_iomux_uart();
-
-       return 0;
-}
+#endif /* CONFIG_FEC_MXC */
 
 int board_init(void)
 {
diff --git a/configs/colibri-imx6ull_defconfig 
b/configs/colibri-imx6ull_defconfig
index b19b3b7fb2..ce2c09338d 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -15,7 +15,6 @@ CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_IMI is not set
@@ -24,9 +23,11 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_NAND_TORTURE=y
 CONFIG_CMD_USB=y
@@ -34,6 +35,7 @@ CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
 
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx6ull-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)"
@@ -63,6 +65,7 @@ CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
-- 
2.20.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to