On Tue, 23 Apr 2019, Michal Simek wrote: > On 20. 04. 19 12:44, Robert P. J. Day wrote: > > > > i've asked on the meta-xilinx mailing list, and rummaged around the > > net, and have failed to do something that should be straightforward -- > > i want to simply boot an avnet zedboard to a recent u-boot and stop > > there; i have no need to go any further for the time being. > > > > i have no problem configuring and building u-boot using: > > > > $ make zynq_zed_defconfig > > > > and as a test, i've tried to download any pre-built SD card > > images/files just to verify that the board boots, with absolutely no > > luck. i've formatted and re-formatted SD cards, populated them with > > allegedly working image files, checked and rechecked jumper settings > > to boot from SD card, used minicom and picocom to connect to the UART > > port ... all i ever see is the power LED come on, and never anything > > else. > > > > if someone can point me at a recipe that is verified to work to get > > u-boot up and running on this zedboard, i would be eternally grateful, > > because i'm running out of ideas. > > I didn't try zed board for quite a long time. > You can look at images distributed via http://zedboard.org/ > or petalinux bsp which should also run on zeboard.
actually, just resolved getting SD card to boot so apologies for the interruption ... we're good here. rday _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot