Introduce new UCLASS_PCI_EP class for handling PCI endpoint
devices, allowing to set various attributes of the PCI endpoint
device, such as:
* configuration space header
* BAR definitions
* outband memory mapping
* start/stop PCI link
Signed-off-by: Ramon Fried <ramon.fr...@gmail.com>
---
Changes in V2:
- Changed u8/u16... to uint
- Changed EINVAL to ENOSYS
- Changed void funcs to int
- Added a bit more info in comments
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/pci_endpoint/Kconfig | 17 ++
drivers/pci_endpoint/Makefile | 6 +
drivers/pci_endpoint/pci_ep-uclass.c | 189 +++++++++++++
include/dm/uclass-id.h | 1 +
include/pci_ep.h | 388 +++++++++++++++++++++++++++
7 files changed, 604 insertions(+)
create mode 100644 drivers/pci_endpoint/Kconfig
create mode 100644 drivers/pci_endpoint/Makefile
create mode 100644 drivers/pci_endpoint/pci_ep-uclass.c
create mode 100644 include/pci_ep.h
diff --git a/drivers/Kconfig b/drivers/Kconfig
index e6702eced4..258dfa19e8 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -64,6 +64,8 @@ source "drivers/nvme/Kconfig"
source "drivers/pci/Kconfig"
+source "drivers/pci_endpoint/Kconfig"
+
source "drivers/pch/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index a7bba3ed56..480b97ef58 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_FPGA) += fpga/
obj-y += misc/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_NVME) += nvme/
+obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
obj-y += pcmcia/
obj-y += dfu/
obj-$(CONFIG_PCH) += pch/
diff --git a/drivers/pci_endpoint/Kconfig b/drivers/pci_endpoint/Kconfig
new file mode 100644
index 0000000000..ac4f43d1ab
--- /dev/null
+++ b/drivers/pci_endpoint/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# PCI Endpoint Support
+#
+
+menu "PCI Endpoint"
+
+config PCI_ENDPOINT
+ bool "PCI Endpoint Support"
+ depends on DM
+ help
+ Enable this configuration option to support configurable PCI
+ endpoints. This should be enabled if the platform has a PCI
+ controllers that can operate in endpoint mode (as a device
+ connected to PCI host or bridge).
+
+endmenu
diff --git a/drivers/pci_endpoint/Makefile b/drivers/pci_endpoint/Makefile
new file mode 100644
index 0000000000..80a1066925
--- /dev/null
+++ b/drivers/pci_endpoint/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2019
+# Ramon Fried <ramon.fr...@gmail.com>
+
+obj-y += pci_ep-uclass.o
diff --git a/drivers/pci_endpoint/pci_ep-uclass.c
b/drivers/pci_endpoint/pci_ep-uclass.c
new file mode 100644
index 0000000000..403441cf02
--- /dev/null
+++ b/drivers/pci_endpoint/pci_ep-uclass.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCI Endpoint uclass
+ *
+ * Based on Linux PCI-EP driver written by
+ * Kishon Vijay Abraham I <kis...@ti.com>
+ *
+ * Copyright (c) 2019
+ * Written by Ramon Fried <ramon.fr...@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <linux/log2.h>
+#include <pci_ep.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int pci_ep_write_header(struct udevice *dev, uint fn, struct pci_ep_header
*hdr)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->write_header)
+ return -ENOSYS;
+
+ return ops->write_header(dev, fn, hdr);
+}
+
+int pci_ep_read_header(struct udevice *dev, uint fn, struct pci_ep_header *hdr)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->read_header)
+ return -ENOSYS;
+
+ return ops->read_header(dev, fn, hdr);
+}
+
+int pci_ep_set_bar(struct udevice *dev, uint func_no, struct pci_bar *ep_bar)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+ int flags = ep_bar->flags;
+
+ /* Some basic bar validity checks */
+ if (((ep_bar->barno == BAR_5) &&
+ (flags & PCI_BASE_ADDRESS_MEM_TYPE_64)) ||
+ ((flags & PCI_BASE_ADDRESS_SPACE_IO) &&
+ (flags & PCI_BASE_ADDRESS_IO_MASK)) ||
+ (upper_32_bits(ep_bar->size) &&
+ !(flags & PCI_BASE_ADDRESS_MEM_TYPE_64)))
+ return -EINVAL;
+
+ if (!ops->set_bar)
+ return -ENOSYS;
+
+ return ops->set_bar(dev, func_no, ep_bar);
+}
+
+int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->clear_bar)
+ return -ENOSYS;
+
+ return ops->clear_bar(dev, func_num, bar);
+}
+
+int pci_ep_map_addr(struct udevice *dev, uint func_no, phys_addr_t addr,
+ u64 pci_addr, size_t size)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->map_addr)
+ return -ENOSYS;
+
+ return ops->map_addr(dev, func_no, addr, pci_addr, size);
+}
+
+void pci_ep_unmap_addr(struct udevice *dev, uint func_no, phys_addr_t addr)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->unmap_addr)
+ return;
+
+ ops->unmap_addr(dev, func_no, addr);
+}
+
+int pci_ep_set_msi(struct udevice *dev, uint func_no, uint interrupts)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+ u8 encode_int;
+
+ if (interrupts > 32)
+ return -EINVAL;
+
+ if (!ops->set_msi)
+ return -ENOSYS;
+
+ encode_int = order_base_2(interrupts);
+
+ return ops->set_msi(dev, func_no, encode_int);
+}
+
+int pci_ep_get_msi(struct udevice *dev, uint func_no)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+ int interrupt;
+
+ if (!ops->get_msi)
+ return -ENOSYS;
+
+ interrupt = ops->get_msi(dev, func_no);
+
+ if (interrupt < 0)
+ return 0;
+
+ interrupt = 1 << interrupt;
+
+ return interrupt;
+}
+
+int pci_ep_set_msix(struct udevice *dev, uint func_no, uint interrupts)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (interrupts < 1 || interrupts > 2048)
+ return -EINVAL;
+
+ if (!ops->set_msix)
+ return -ENOSYS;
+
+ return ops->set_msix(dev, func_no, interrupts);
+}
+
+int pci_ep_get_msix(struct udevice *dev, uint func_no)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+ int interrupt;
+
+ if (!ops->get_msix)
+ return -ENOSYS;
+
+ interrupt = ops->get_msix(dev, func_no);
+
+ if (interrupt < 0)
+ return 0;
+
+ return interrupt + 1;
+}
+
+int pci_ep_raise_irq(struct udevice *dev, uint func_no,
+ enum pci_ep_irq_type type, uint interrupt_num)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->raise_irq)
+ return -ENOSYS;
+
+ return ops->raise_irq(dev, func_no, type, interrupt_num);
+}
+
+int pci_ep_start(struct udevice *dev)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->start)
+ return -ENOSYS;
+
+ return ops->start(dev);
+}
+
+int pci_ep_stop(struct udevice *dev)
+{
+ struct pci_ep_ops *ops = pci_ep_get_ops(dev);
+
+ if (!ops->stop)
+ return -ENOSYS;
+
+ return ops->stop(dev);
+}
+
+UCLASS_DRIVER(pci_ep) = {
+ .id = UCLASS_PCI_EP,
+ .name = "pci_ep",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 86e59781b0..d29f7d5a34 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -67,6 +67,7 @@ enum uclass_id {
UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */
UCLASS_PCH, /* x86 platform controller hub */
UCLASS_PCI, /* PCI bus */
+ UCLASS_PCI_EP, /* PCI endpoint device */
UCLASS_PCI_GENERIC, /* Generic PCI bus device */
UCLASS_PHY, /* Physical Layer (PHY) device */
UCLASS_PINCONFIG, /* Pin configuration node device */
diff --git a/include/pci_ep.h b/include/pci_ep.h
new file mode 100644
index 0000000000..183db59f59
--- /dev/null
+++ b/include/pci_ep.h
@@ -0,0 +1,388 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Adapted from Linux kernel driver
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kis...@ti.com>
+ *
+ * (C) Copyright 2019
+ * Ramon Fried <ramon.fr...@gmail.com>
+ */
+
+#ifndef _PCI_EP_H
+#define _PCI_EP_H
+
+#include <pci.h>
+
+/**
+ * enum pci_interrupt_pin - PCI INTx interrupt values
+ * @PCI_INTERRUPT_UNKNOWN: Unknown or unassigned interrupt
+ * @PCI_INTERRUPT_INTA: PCI INTA pin
+ * @PCI_INTERRUPT_INTB: PCI INTB pin
+ * @PCI_INTERRUPT_INTC: PCI INTC pin
+ * @PCI_INTERRUPT_INTD: PCI INTD pin
+ *
+ * Corresponds to values for legacy PCI INTx interrupts, as can be found in the
+ * PCI_INTERRUPT_PIN register.
+ */
+enum pci_interrupt_pin {
+ PCI_INTERRUPT_UNKNOWN,
+ PCI_INTERRUPT_INTA,
+ PCI_INTERRUPT_INTB,
+ PCI_INTERRUPT_INTC,
+ PCI_INTERRUPT_INTD,
+};
+
+enum pci_barno {
+ BAR_0,
+ BAR_1,
+ BAR_2,
+ BAR_3,
+ BAR_4,
+ BAR_5,
+};
+
+enum pci_ep_irq_type {
+ PCI_EP_IRQ_UNKNOWN,
+ PCI_EP_IRQ_LEGACY,
+ PCI_EP_IRQ_MSI,
+ PCI_EP_IRQ_MSIX,
+};
+
+/**
+ * struct pci_bar - represents the BAR (Base Address Register) of EP device
+ * @phys_addr: physical address that should be mapped to the BAR
+ * @size: the size of the address space present in BAR
+ * pci_barno: number of pci BAR to set (0..5)
+ * @flags: BAR access flags
+ */
+struct pci_bar {
+ dma_addr_t phys_addr;
+ size_t size;
+ enum pci_barno barno;
+ int flags;
+};
+
+/**
+ * struct pci_ep_header - represents standard configuration header
+ * @vendorid: identifies device manufacturer
+ * @deviceid: identifies a particular device
+ * @revid: specifies a device-specific revision identifier
+ * @progif_code: identifies a specific register-level programming interface
+ * @subclass_code: identifies more specifically the function of the device
+ * @baseclass_code: broadly classifies the type of function the device performs
+ * @cache_line_size: specifies the system cacheline size in units of DWORDs
+ * @subsys_vendor_id: vendor of the add-in card or subsystem
+ * @subsys_id: id specific to vendor
+ * @interrupt_pin: interrupt pin the device (or device function) uses
+ */
+struct pci_ep_header {
+ u16 vendorid;
+ u16 deviceid;
+ u8 revid;
+ u8 progif_code;
+ u8 subclass_code;
+ u8 baseclass_code;
+ u8 cache_line_size;
+ u16 subsys_vendor_id;
+ u16 subsys_id;
+ enum pci_interrupt_pin interrupt_pin;
+};
+
+/* PCI endpoint operations */
+struct pci_ep_ops {
+ /**
+ * write_header() - Write a PCI configuration space header
+ *
+ * @dev: device to write to
+ * @func_num: EP function to fill
+ * @hdr: header to write
+ * @return 0 if OK, -ve on error
+ */
+ int (*write_header)(struct udevice *dev, uint func_num,
+ struct pci_ep_header *hdr);
+ /**
+ * read_header() - Read a PCI configuration space header
+ *
+ * @dev: device to write to
+ * @func_num: EP function to fill
+ * @hdr: header to read to
+ * @return 0 if OK, -ve on error
+ */
+ int (*read_header)(struct udevice *dev, uint func_num,
+ struct pci_ep_header *hdr);
+ /**
+ * set_bar() - set BAR (Base Address Register)
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @bar: bar data
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_bar)(struct udevice *dev, uint func_num,
+ struct pci_bar *bar);
+ /**
+ * clear_bar() - clear BAR (Base Address Register)
+ *
+ * @dev: device to clear
+ * @func_num: EP function to clear
+ * @bar: bar number
+ * @return 0 if OK, -ve on error
+ */
+ int (*clear_bar)(struct udevice *dev, uint func_num,
+ enum pci_barno bar);
+ /**
+ * map_addr() - map CPU address to PCI address
+ *
+ * outband region is used in order to generate PCI read/write
+ * transaction from local memory/write.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @addr: local physical address base
+ * @pci_addr: pci address to translate to
+ * @size: region size
+ * @return 0 if OK, -ve on error
+ */
+ int (*map_addr)(struct udevice *dev, uint func_num,
+ phys_addr_t addr, u64 pci_addr, size_t size);
+ /**
+ * unmap_addr() - unmap CPU address to PCI address
+ *
+ * unmap previously mapped region.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @addr: local physical address base
+ */
+ void (*unmap_addr)(struct udevice *dev, uint func_num,
+ phys_addr_t addr);
+ /**
+ * set_msi() - set msi capability property
+ *
+ * set the number of required MSI vectors the device
+ * needs for operation.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @interrupts: required interrupts count
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_msi)(struct udevice *dev, uint func_num, uint interrupts);
+
+ /**
+ * get_msi() - get the number of MSI interrupts allocated by the host.
+ *
+ * Read the Multiple Message Enable bitfield from
+ * Message control register.
+ *
+ * @dev: device to use
+ * @func_num: EP function to use
+ * @return msi count if OK, -EINVAL if msi were not enabled at host.
+ */
+ int (*get_msi)(struct udevice *dev, uint func_num);
+
+ /**
+ * set_msix() - set msix capability property
+ *
+ * set the number of required MSIx vectors the device
+ * needs for operation.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @interrupts: required interrupts count
+ * @return 0 if OK, -ve on error
+ */
+ int (*set_msix)(struct udevice *dev, uint func_num,
+ uint interrupts);
+
+ /**
+ * get_msix() - get the number of MSIx interrupts allocated by the host.
+ *
+ * Read the Multiple Message Enable bitfield from
+ * Message control register.
+ *
+ * @dev: device to use
+ * @func_num: EP function to use
+ * @return msi count if OK, -EINVAL if msi were not enabled at host.
+ */
+ int (*get_msix)(struct udevice *dev, uint func_num);
+
+ /**
+ * raise_irq() - raise a legacy, MSI or MSI-X interrupt
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @type: type of irq to send
+ * @interrupt_num: interrupt vector to use
+ * @return 0 if OK, -ve on error
+ */
+ int (*raise_irq)(struct udevice *dev, uint func_num,
+ enum pci_ep_irq_type type, uint interrupt_num);
+ /**
+ * start() - start the PCI link
+ *
+ * @dev: device to set
+ * @return 0 if OK, -ve on error
+ */
+ int (*start)(struct udevice *dev);
+
+ /**
+ * stop() - stop the PCI link
+ *
+ * @dev: device to set
+ * @return 0 if OK, -ve on error
+ */
+ int (*stop)(struct udevice *dev);
+};
+
+#define pci_ep_get_ops(dev) ((struct pci_ep_ops *)(dev)->driver->ops)
+
+/**
+ * pci_ep_write_header() - Write a PCI configuration space header
+ *
+ * @dev: device to write to
+ * @func_num: EP function to fill
+ * @hdr: header to write
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_write_header(struct udevice *dev, uint func_num,
+ struct pci_ep_header *hdr);
+
+/**
+ * dm_pci_ep_read_header() - Read a PCI configuration space header
+ *
+ * @dev: device to write to
+ * @func_num: EP function to fill
+ * @hdr: header to read to
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_read_header(struct udevice *dev, uint func_num,
+ struct pci_ep_header *hdr);
+/**
+ * pci_ep_set_bar() - set BAR (Base Address Register)
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @bar: bar data
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_set_bar(struct udevice *dev, uint func_num, struct pci_bar *bar);
+
+/**
+ * pci_ep_clear_bar() - clear BAR (Base Address Register)
+ *
+ * @dev: device to clear
+ * @func_num: EP function to clear
+ * @bar: bar number
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_clear_bar(struct udevice *dev, uint func_num, enum pci_barno bar);
+/**
+ * pci_ep_map_addr() - map CPU address to PCI address
+ *
+ * outband region is used in order to generate PCI read/write
+ * transaction from local memory/write.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @addr: local physical address base
+ * @pci_addr: pci address to translate to
+ * @size: region size
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_map_addr(struct udevice *dev, uint func_num, phys_addr_t addr,
+ u64 pci_addr, size_t size);
+/**
+ * pci_ep_unmap_addr() - unmap CPU address to PCI address
+ *
+ * unmap previously mapped region.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @addr: local physical address base
+ */
+void pci_ep_unmap_addr(struct udevice *dev, uint func_num, phys_addr_t addr);
+/**
+ * pci_ep_set_msi() - set msi capability property
+ *
+ * set the number of required MSI vectors the device
+ * needs for operation.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @interrupts: required interrupts count
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_set_msi(struct udevice *dev, uint func_num, uint interrupts);
+
+/**
+ * pci_ep_get_msi() - get the number of MSI interrupts allocated by the host.
+ *
+ * Read the Multiple Message Enable bitfield from
+ * Message control register.
+ *
+ * @dev: device to use
+ * @func_num: EP function to use
+ * @return msi count if OK, -EINVAL if msi were not enabled at host.
+ */
+int pci_ep_get_msi(struct udevice *dev, uint func_num);
+
+/**
+ * pci_ep_set_msix() - set msi capability property
+ *
+ * set the number of required MSIx vectors the device
+ * needs for operation.
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @interrupts: required interrupts count
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_set_msix(struct udevice *dev, uint func_num, uint interrupts);
+
+/**
+ * pci_ep_get_msix() - get the number of MSIx interrupts allocated by the host.
+ *
+ * Read the Multiple Message Enable bitfield from
+ * Message control register.
+ *
+ * @dev: device to use
+ * @func_num: EP function to use
+ * @return msi count if OK, -EINVAL if msi were not enabled at host.
+ */
+int pci_ep_get_msix(struct udevice *dev, uint func_num);
+
+/**
+ * pci_ep_raise_irq() - raise a legacy, MSI or MSI-X interrupt
+ *
+ * @dev: device to set
+ * @func_num: EP function to set
+ * @type: type of irq to send
+ * @interrupt_num: interrupt vector to use
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_raise_irq(struct udevice *dev, uint func_num,
+ enum pci_ep_irq_type type, uint interrupt_num);
+/**
+ * pci_ep_start() - start the PCI link
+ *
+ * Enable PCI endpoint device and start link
+ * process.
+ *
+ * @dev: device to set
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_start(struct udevice *dev);
+
+/**
+ * pci_ep_stop() - stop the PCI link
+ *
+ * Disable PCI endpoint device and stop
+ * link.
+ *
+ * @dev: device to set
+ * @return 0 if OK, -ve on error
+ */
+int pci_ep_stop(struct udevice *dev);
+
+#endif
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
