Le 26/04/2019 à 14:36, Fabio Estevam a écrit :
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
so fix the README file accordingly.
Signed-off-by: Fabio Estevam <feste...@gmail.com>
---
board/technexion/pico-imx7d/README | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/technexion/pico-imx7d/README
b/board/technexion/pico-imx7d/README
index f21d8301cb..6aa0d25af5 100644
--- a/board/technexion/pico-imx7d/README
+++ b/board/technexion/pico-imx7d/README
@@ -11,7 +11,7 @@ $ make mrproper
$ make pico-imx7d_defconfig
$ make
-This generates the SPL and u-boot.img binaries.
+This generates the SPL and u-boot-dtb.img binaries.
1. Loading U-Boot via USB Serial Download Protocol
@@ -32,15 +32,15 @@ to use an externally powered USB hub between the board and the host computer.
Open a terminal program such as minicom.
-Copy SPL and u-boot.img to the imx_usb_loader folder.
+Copy SPL and u-boot-dtb.img to the imx_usb_loader folder.
Load the SPL binary via USB:
$ sudo ./imx_usb SPL
-Load the u-boot.img binary via USB:
+Load the u-boot-dtb.img binary via USB:
-$ sudo ./imx_usb u-boot.img
+$ sudo ./imx_usb u-boot-dtb.img
Then U-Boot starts and its messages appear in the console program.
@@ -55,11 +55,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool:
=> dfu 0 mmc 0
-Flash SPL and u-boot.img into the eMMC running the following commands on a PC:
+Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a
PC:
$ sudo dfu-util -D SPL -a spl
-$ sudo dfu-util -D u-boot.img -a u-boot
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
Remove power from the pico board.
Acked-by: Joris Offouga <offougajo...@gmail.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
