Hello Simon, Thank you for the repply. >> You probably should use mrproper here, not distclean? I do agree, mrproper should be used.
>> So what's $CC set to? I don't think you need ARCH=arm, works without that >> for me. Sorry, I forgot to say that ${CC} is pointig to Linaro gcc folder. >>So SPL runs fine but it doesn't load U-Boot? Or does it fail running >>anything? Please send the console output, if any. Reggarding the console output, there is none when I set CONFIG_DEFAULT_DEVICE_TREE=“socfpga_cyclone5_de10_nano”. >>I don't see the file socfpga_cyclone5_de0_nano_soc.dts, where does it come >>from? I'm relating to the original files from the U-Boot source, the path is arch/arm/dts/<filename>, but I can attach the files if it's needded. Is there any other info that would help? Best regards, Rafael Villatore ________________________________ De: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com> Enviado: domingo, 28 de abril de 2019 05:13 Para: rafael mello Cc: u-boot@lists.denx.de Assunto: Re: [U-Boot] DE10 Nano U-Boot v2019.04 Issues On 27.04.19 19:59, rafael mello wrote: > Hello, I've attempted to build u-boot v2019.04 for the DE10 Nano board using > the following commands: > make ARCH=arm CROSS_COMPILE=${CC} distclean You probably should use mrproper here, not distclean? > make ARCH=arm CROSS_COMPILE=${CC} socfpga_de10_nano_defconfig > make ARCH=arm CROSS_COMPILE=${CC} u-boot-with-spl.sfp So what's $CC set to? I don't think you need ARCH=arm, works without that for me. > > It builds just fine but I'm not able to make the board load U-Boot correctly. So SPL runs fine but it doesn't load U-Boot? Or does it fail running anything? Please send the console output, if any. > If I run the same commands using v2018.05 it builds and I'm able to boot the > board. > > After some attempts to find the issue, I was able to compile and boot the > v2019.04 by changing the > CONFIG_DEFAULT_DEVICE_TREE=“socfpga_cyclone5_de10_nano” to > CONFIG_DEFAULT_DEVICE_TREE=“socfpga_cyclone5_de0_nano_soc” in the > socfpga_de10_nano_defconfig file. > That lead me to belive that there was an issue with the > socfpga_cyclone5_de10_nano.dts file. > After changing the socfpga_cyclone5_de10_nano.dts to be identical to the > socfpga_cyclone5_de0_nano_soc.dts I wasn't able to boot the board, making me > think that the issue is somewere else, since I'm also able to compile and > boot the board if I rename the socfpga_cyclone5_de10_nano.dts to > socfpga_cyclone5_de0_nano_soc.dts. I don't see the file socfpga_cyclone5_de0_nano_soc.dts, where does it come from? Unfortunately, I don't have that board, so I cannot test it myself. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot