Trying to bring up uSDHC2 the following error message was observed: MMC: imx8_clk_set_rate(Invalid clk ID #60) imx8_clk_set_rate(Invalid clk ID #60) usdhc@5b030000 - probe failed: -22
This commit fixes this by properly setting resp. clocks. Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> Reviewed-by: Max Krummenacher <max.krummenac...@toradex.com> --- Changes in v2: None drivers/clk/imx/clk-imx8qm.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/clk/imx/clk-imx8qm.c b/drivers/clk/imx/clk-imx8qm.c index 6b5561e178..a6b09d2109 100644 --- a/drivers/clk/imx/clk-imx8qm.c +++ b/drivers/clk/imx/clk-imx8qm.c @@ -80,6 +80,12 @@ ulong imx8_clk_get_rate(struct clk *clk) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_UART0_IPG_CLK: case IMX8QM_UART0_CLK: resource = SC_R_UART_0; @@ -185,6 +191,12 @@ ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_ENET0_IPG_CLK: case IMX8QM_ENET0_AHB_CLK: case IMX8QM_ENET0_REF_DIV: @@ -273,6 +285,12 @@ int __imx8_clk_enable(struct clk *clk, bool enable) resource = SC_R_SDHC_1; pm_clk = SC_PM_CLK_PER; break; + case IMX8QM_SDHC2_IPG_CLK: + case IMX8QM_SDHC2_CLK: + case IMX8QM_SDHC2_DIV: + resource = SC_R_SDHC_2; + pm_clk = SC_PM_CLK_PER; + break; case IMX8QM_ENET0_IPG_CLK: case IMX8QM_ENET0_AHB_CLK: case IMX8QM_ENET0_REF_DIV: -- 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot