> Subject: Re: [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag > > On Tue, 30 Apr 2019 10:18:12 +0000 > Peng Fan <peng....@nxp.com> wrote: > > > Add pre reloc flag to use this driver before relocation > > > > Signed-off-by: Peng Fan <peng....@nxp.com> > > --- > > drivers/clk/clk_fixed_rate.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/clk/clk_fixed_rate.c > > b/drivers/clk/clk_fixed_rate.c index 069e643fbc..debada1463 100644 > > --- a/drivers/clk/clk_fixed_rate.c > > +++ b/drivers/clk/clk_fixed_rate.c > > @@ -45,4 +45,5 @@ U_BOOT_DRIVER(clk_fixed_rate) = { > > .ofdata_to_platdata = clk_fixed_rate_ofdata_to_platdata, > > .platdata_auto_alloc_size = sizeof(struct clk_fixed_rate), > > .ops = &clk_fixed_rate_ops, > > + .flags = DM_FLAG_PRE_RELOC, > > }; > > This probably shall be done with proper dts file (from TPC70 - imx6q > conversion code):
My understanding is DM_FLAG_PRE_RELOC will let the driver could be used before relocation. The dts u-boot,dm-spl or u-boot,dm-pre-reloc is just to mark the device could be used at the corresponding stage. Only modify dts will not make it work without the DM_FLAG_PRE_RELOC, Right? Thanks, Peng. > > +#include "imx6qdl-u-boot.dtsi" > + > +/ { > + clocks { > + u-boot,dm-spl; > + osc { > + u-boot,dm-spl; > + }; > + }; > +}; > + > +&clks { > + u-boot,dm-pre-reloc; > +}; > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lu...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot