When generating the flash.bin binary the following DTC warnings
are seen:
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit
name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@1 has a unit
name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit
name, but no reg property
u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/config@1
has a unit name, but no reg property
Fix them by removing the meaningless @1 entries.
Signed-off-by: Fabio Estevam <feste...@gmail.com>
---
arch/arm/mach-imx/mkimage_fit_atf.sh | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh
b/arch/arm/mach-imx/mkimage_fit_atf.sh
index 38c9858e84..fc9342543a 100755
--- a/arch/arm/mach-imx/mkimage_fit_atf.sh
+++ b/arch/arm/mach-imx/mkimage_fit_atf.sh
@@ -53,7 +53,7 @@ cat << __HEADER_EOF
description = "Configuration to load ATF before U-Boot";
images {
- uboot@1 {
+ uboot {
description = "U-Boot (64-bit)";
data = /incbin/("$BL33");
type = "standalone";
@@ -61,7 +61,7 @@ cat << __HEADER_EOF
compression = "none";
load = <$BL33_LOAD_ADDR>;
};
- atf@1 {
+ atf {
description = "ARM Trusted Firmware";
data = /incbin/("$BL31");
type = "firmware";
@@ -74,7 +74,7 @@ __HEADER_EOF
if [ -f $BL32 ]; then
cat << __HEADER_EOF
- tee@1 {
+ tee {
description = "TEE firmware";
data = /incbin/("$BL32");
type = "firmware";
@@ -90,7 +90,7 @@ cnt=1
for dtname in $*
do
cat << __FDT_IMAGE_EOF
- fdt@$cnt {
+ fdt {
description = "$(basename $dtname .dtb)";
data = /incbin/("$dtname");
type = "flat_dt";
@@ -103,7 +103,7 @@ done
cat << __CONF_HEADER_EOF
};
configurations {
- default = "config@1";
+ default = "config";
__CONF_HEADER_EOF
@@ -112,20 +112,20 @@ for dtname in $*
do
if [ -f $BL32 ]; then
cat << __CONF_SECTION_EOF
- config@$cnt {
+ config {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1", "tee@1";
- fdt = "fdt@$cnt";
+ firmware = "uboot";
+ loadables = "atf", "tee";
+ fdt = "fdt";
};
__CONF_SECTION_EOF
else
cat << __CONF_SECTION1_EOF
- config@$cnt {
+ config {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1";
- fdt = "fdt@$cnt";
+ firmware = "uboot";
+ loadables = "atf";
+ fdt = "fdt";
};
__CONF_SECTION1_EOF
fi
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
