On Tue, 7 May 2019 17:16:52 +0200 Marek Vasut <ma...@denx.de> wrote: > On 5/7/19 5:11 PM, Neil Armstrong wrote: > > Hi Marek, > > > > On 07/05/2019 15:05, Marek Vasut wrote: > >> On 5/7/19 10:43 AM, Neil Armstrong wrote: > >>> This patchset adds support for USB on Amlogic G12A SoCs. > >>> > >>> This patchset is composed with : > >>> - PHY Drivers > >>> - USB Control Glue driver > >>> - G12A board setup for Device mode > >>> > >>> Device Tree nodes will be added in a separate patchset when > >>> applied on a tagged Linux tree. > >>> > >>> The Amlogic G12A USB Complex is composed of : > >>> - 2 USB Controllers : > >>> * DWC3 for USB2 and USB3 Host functionality > >>> * DWC2 for USB2 Peripheral functionality > >>> - 2 USB2 OTG PHYs, only a single one will be routed to either > >>> DWC2 to DWC3 > >>> - 1 USB3 PHY shared with PCIE funcionnality > >>> - A Glue to control PHY routing, setup and OTG detection > >>> > >>> The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, > >>> including routing of the OTG PHY between the DWC3 and DWC2 > >>> controllers, and setups the on-chip OTG mode selection for this > >>> PHY. > >>> > >>> This drivers supports the on-probe setup of the OTG mode, and > >>> manually via a setup function in the G12A common board code. > >>> > >>> Changes since v2: > >>> - rebased on u-boot master > >>> > >>> Changes since v1: > >>> - switch printf() to debug() in patch 1 > >>> > >>> Neil Armstrong (3): > >>> usb: dwc3: Add Meson G12A USB Glue > >>> phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers > >>> mach-meson: g12a: add DWC2 peripheral mode support > >>> > >>> arch/arm/include/asm/arch-meson/usb.h | 12 + > >>> arch/arm/mach-meson/board-g12a.c | 126 +++++++ > >>> drivers/phy/Kconfig | 8 + > >>> drivers/phy/Makefile | 1 + > >>> drivers/phy/meson-g12a-usb2.c | 216 ++++++++++++ > >>> drivers/phy/meson-g12a-usb3-pcie.c | 345 +++++++++++++++++++ > >>> drivers/usb/dwc3/Kconfig | 8 + > >>> drivers/usb/dwc3/Makefile | 1 + > >>> drivers/usb/dwc3/dwc3-meson-g12a.c | 456 > >>> ++++++++++++++++++++++++++ 9 files changed, 1173 insertions(+) > >>> create mode 100644 arch/arm/include/asm/arch-meson/usb.h > >>> create mode 100644 drivers/phy/meson-g12a-usb2.c > >>> create mode 100644 drivers/phy/meson-g12a-usb3-pcie.c > >>> create mode 100644 drivers/usb/dwc3/dwc3-meson-g12a.c > >>> > >> Looks good to me, pick this via the meson tree please. > >> > > > > No problem, but Lukasz wanted to pick it up. > > > > Lukasz, I can push it through u-boot-amlogic tree, is it ok for > > you ? > > I don't care either way, whatever is comfortable for you two. >
Yes, please - use the u-boot-amlogic tree. Thanks in advance. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpMLh5KK_iT2.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
