Hello, Am 07.05.19 um 21:25 schrieb Simon Goldschmidt: > > > On 07.05.19 21:14, Wolfgang Grandegger wrote: >> >> Am 07.05.19 um 13:37 schrieb Simon Goldschmidt: >>> On Tue, May 7, 2019 at 9:41 AM Wolfgang Grandegger >>> <w...@aries-embedded.de> wrote: >>>> >>>> >>>> >>>> Am 06.05.19 um 22:16 schrieb Simon Goldschmidt: >>>>> Am 06.05.2019 um 17:45 schrieb Wolfgang Grandegger: >>>>>> Re-add support for Aries Embedded MCV SoM, which is CycloneV based >>>>>> and the associated MCVEVK baseboard. The board can boot from eMMC. >>>>>> Ethernet and USB is supported. >>>>>> >>>>>> The Aries Embedded boards have been removed with commit 03b54997d568 >>>>>> ("board/aries: Remove"). I will now take care of them. >>>>>> >>>>>> Signed-off-by: Wolfgang Grandegger <w...@aries-embedded.de> >>>>>> CC: Marek Vasut <ma...@denx.de> >>>>>> CC: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com> >>>>>> --- >>>>>> .travis.yml | 2 +- >>>>>> arch/arm/dts/Makefile | 1 + >>>>>> arch/arm/dts/socfpga_cyclone5_mcv.dtsi | 22 + >>>>>> arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi | 38 ++ >>>>>> arch/arm/dts/socfpga_cyclone5_mcvevk.dts | 81 +++ >>>>>> arch/arm/mach-socfpga/Kconfig | 7 + >>>>>> board/aries/mcvevk/MAINTAINERS | 6 + >>>>>> board/aries/mcvevk/Makefile | 7 + >>>>>> board/aries/mcvevk/qts/iocsr_config.h | 659 >>>>>> +++++++++++++++++++++++ >>>>>> board/aries/mcvevk/qts/pinmux_config.h | 218 ++++++++ >>>>>> board/aries/mcvevk/qts/pll_config.h | 84 +++ >>>>>> board/aries/mcvevk/qts/sdram_config.h | 343 >>>>>> ++++++++++++ >>>>> >>>>> These files are always a mystery. Would you be able to provide >>>>> (long-lived) link to a simplistic quartus project so that everyone can >>>>> regenerate these? >>>>> >>>>> I'll try to provide such a quartus project for the socrates board, and >>>>> I'd be very happy if the original Intel dev boards could do so as >>>>> well! >>>> >>>> There is a Quartus example project for that module/board here: >>>> >>>> https://github.com/ARIES-Embedded/mcv >>> >>> Cool. And is this a permanent link that we could add to some kind >>> of documentation for this board in the U-Boot sources? That would >>> ensure U-Boot maintainers can find it in the future... >> >> I will check with the author! >> >> BTW: My patch works fine on top of v2019.04 but the boot hangs without >> console output with the latest HEAD. The problems start with commit: >> >> ede6e7b reset: socfpga: add reset handling for old kernels >> >> Then I get: >> >> U-Boot SPL 2019.04-00508-g03b5c7e-dirty (May 07 2019 - 21:03:52 +0200) >> ### ERROR ### Please RESET the board ### >> >> Any idea how to fix that? > > No, sorry, I don't have an idea right now. Are you sure you're not > missing any of the "u-boot,dm-pre-reloc" tags? > > And you're absolutely sure this very commit produces this error?
Well, I somehow fooled myself. Sorry for the noise. The problem was the missing "u-boot,dm-pre-reloc" for the "rst" odr "sdr" node and "CONFIG_SPL_TEXT_BASE=0xFFFF0000" in the defconfig. Now U-Boot starts but the kernel does not... Wolfgang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot