The CONFIG_POWER and CONFIG_POWER_I2C were introduced in
include/configs/exynos5-common.h in commit 19bd3aaa5991 ("exynos5: fix
build break by adding CONFIG_POWER") and then it propagated up to
include/configs/arndale.h. However before that commit, there was no
build break at all on Arndale and SMDK5250 boards. It seems the commit
fixed nothing and just added unused defines.
In fact, the Arndale board is not configuring its PMIC (S5M8767) which
uses I2C bus.
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
Reviewed-by: Simon Glass <s...@chromium.org>
---
Not tested on Arndale board. Testing is welcomed.
Changes since v1:
1. Add Simon's tag.
2. Reorder patches - first remove CONFIG_POWER_I2C, then
CONFIG_DM_I2C_COMPAT.
---
include/configs/arndale.h | 8 --------
1 file changed, 8 deletions(-)
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index dd321c4748d0..841f3616482b 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -29,10 +29,6 @@
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
#define CONFIG_PREBOOT
#define CONFIG_S5P_PA_SYSRAM 0x02020000
@@ -41,8 +37,4 @@
/* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it
*/
#define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000
-/* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-
#endif /* __CONFIG_H */
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
