Hi Jagan, On Thu, May 16, 2019 at 2:37 PM Jagan Teki <ja...@amarulasolutions.com> wrote: > > On Thu, May 16, 2019 at 11:02 PM Fabio Estevam <feste...@gmail.com> wrote: > > > > Hi, > > > > I get the following error when trying to boot mx6q sabresd with 2019.07-rc2: > > > > U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300) > > Trying to boot from MMC1 > > spl: could not find mmc device 0. error: -19 > > No device. > > Is it DM-SPL-enabled? check with u-boot,dm-spl on associated nodes?
Yes, configs/mx6sabresd_defconfig has CONFIG_SPL_DM=y. arch/arm/dts/imx6qp-sabresd-u-boot.dtsi passes u-boot,dm-spl to usdhc3. > > usdhc3 is for sabresd, seems like gpio2 missing to add u-boot,dm-spl I tried: --- a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi @@ -12,3 +12,7 @@ &pinctrl_usdhc3 { u-boot,dm-spl; }; + +&gpio2 { + u-boot,dm-spl; +}; but still not booting. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot