On Sun, 2019-05-12 at 22:43 +0200, Marek Vasut wrote:
> Drop the ad-hoc AHCI binding code, this is superseded by
> CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c
> 
> Signed-off-by: Marek Vasut <ma...@denx.de>

Works fine, thanks!

Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>

> Cc: Fabio Estevam <fabio.este...@nxp.com>
> Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com>
> Cc: Max Krummenacher <max.krummenac...@toradex.com>
> Cc: Stefan Agner <stefan.ag...@toradex.com>
> Cc: Stefano Babic <sba...@denx.de>
> ---
>  board/toradex/apalis_imx6/apalis_imx6.c | 49 ---------------------
> ----
>  1 file changed, 49 deletions(-)
> 
> diff --git a/board/toradex/apalis_imx6/apalis_imx6.c
> b/board/toradex/apalis_imx6/apalis_imx6.c
> index 3e59185438..b502d4ef13 100644
> --- a/board/toradex/apalis_imx6/apalis_imx6.c
> +++ b/board/toradex/apalis_imx6/apalis_imx6.c
> @@ -1131,52 +1131,3 @@ U_BOOT_DEVICE(mxc_serial) = {
>       .name = "serial_mxc",
>       .platdata = &mxc_serial_plat,
>  };
> -
> -#if CONFIG_IS_ENABLED(AHCI)
> -static int sata_imx_probe(struct udevice *dev)
> -{
> -     int i, err;
> -
> -     for (i = 0; i < APALIS_IMX6_SATA_INIT_RETRIES; i++) {
> -             err = setup_sata();
> -             if (err) {
> -                     printf("SATA setup failed: %d\n", err);
> -                     return err;
> -             }
> -
> -             udelay(100);
> -
> -             err = dwc_ahsata_probe(dev);
> -             if (!err)
> -                     break;
> -
> -             /* There is no device on the SATA port */
> -             if (sata_dm_port_status(0, 0) == 0)
> -                     break;
> -
> -             /* There's a device, but link not established. Retry */
> -             device_remove(dev, DM_REMOVE_NORMAL);
> -     }
> -
> -     return 0;
> -}
> -
> -struct ahci_ops sata_imx_ops = {
> -     .port_status = dwc_ahsata_port_status,
> -     .reset  = dwc_ahsata_bus_reset,
> -     .scan   = dwc_ahsata_scan,
> -};
> -
> -static const struct udevice_id sata_imx_ids[] = {
> -     { .compatible = "fsl,imx6q-ahci" },
> -     { }
> -};
> -
> -U_BOOT_DRIVER(sata_imx) = {
> -     .name           = "dwc_ahci",
> -     .id             = UCLASS_AHCI,
> -     .of_match       = sata_imx_ids,
> -     .ops            = &sata_imx_ops,
> -     .probe          = sata_imx_probe,
> -};
> -#endif /* AHCI */
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to