On Thu, May 23, 2019 at 10:18 PM Fabio Estevam <feste...@gmail.com> wrote: > > On Thu, May 23, 2019 at 1:11 PM Jagan Teki <ja...@amarulasolutions.com> wrote: > > > Don't know whether this is SPL size issue or not? can you try > > SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512 bytes > > (one build issue on fdtdec_get_int undefined) > > Yes, it does not build with CONFIG_SPL_OF_PLATDATA: > > lib/built-in.o: In function `fdtdec_parse_phandle_with_args': > /home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to `fdtdec_get_int'
Couldn't dig much here, would be happy someone can find this? > drivers/built-in.o: In function `fsl_esdhc_probe': > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference > to `fdtdec_get_int' > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference > to `fdtdec_get_int' > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference These we can fix, by supporting platdata support into driver. > to `fdtdec_get_int' > scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed > make[1]: *** [spl/u-boot-spl] Error 1 > > Thanks for the suggestions, but at this point I prefer to go with the > removal of CONFIG_SPL_DM. We have 45 days to release, I think we can make these fixes quite normally what do you think? fsl_esdhc.c build I can mark a patch in few days if required. > > For 2019.07 it would be really nice if we could fix these two issues: > > 1. Allow to load a FIT image via Serial Download Protocol > > 2. Detect the SPL size overflow in build-time 1) We are working on this, 2) can be done. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot