On 5/23/19 8:37 PM, Adam Ford wrote: > On Thu, May 23, 2019 at 1:35 PM Fabio Estevam <feste...@gmail.com> wrote: >> >> Hi Adam, >> >> On Thu, May 23, 2019 at 3:28 PM Adam Ford <aford...@gmail.com> wrote: >> >>> I have been following this thread, because I have been working through >>> attempting to migrate the imx6q_logic board to SPL_OF_CONTROL which >>> requires SPL_DM. >>> >>> To working around the issue you're describing, I played with disabling >>> SPL_DM_USB. With that removed, I can still use nearly all the >>> benefits of SPL_DM without losing access to imx_usb_loader. >>> See log: >> >> I took a look at the configs/imx6q_logic_defconfig file and it does >> not use FIT support like we do in mx6sabresd. >> >> If I remove FIT support then imx_usb_loader works fine here too. >> >> imx6q_logic_defconfig only supports the mx6q variant, whereas sabresd >> needs to support mx6q/dl/qp variants , so we use FIT image that >> contains therese 3 dtbs. >> >> So the problem with SDP at the moment is when trying to load a FIT image. > > Sorry. I misunderstood the problem.
Would it rather make sense to just stick with non-DM/DT SPL for iMX6 for now? -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot