Hi Christoph and Mark, Does this patch ready for rk3399-puma?
Thanks, - Kever On 05/07/2019 05:18 PM, Christoph Müllner wrote: > Hi Mark, > > On 07.05.19 10:57, Mark Kettenis wrote: >>> From: Christoph Muellner <christoph.muell...@theobroma-systems.com> >>> Date: Tue, 7 May 2019 10:39:54 +0200 >>> >>> This reverts commit c869d63f2785ccde22582f96cf40cb8809f838ba. >>> >>> Mainline ATF already supports fdt-parsing, which allows us to >>> pass rk3399-puma specific data to setup things like the correct >>> UART. Therefore we can re-enable platform parameterss again. >> Hi Christoph, >> >> I tried this last weekend on my rk3399-puma board with the (then) >> latest ATF and that didn't work for me. Looked like the board simply >> reset shortly after jumping into the ATF code. Now I may very well >> have done something wrong, and I ran out of time debugging this. > There's a lot more needed to get mainline ATF up and running on RK3399: > > * Only mainline ATF will be able to use correct console (UART0) > * bouncebuf needs to be aware of SD DMA not being able to copy to SRAM/PMUSRAM > * bouncebuf needs static buffer to address heap limitation > * bugfix in ITS generatorscript > > I've already addressed all issues for SD card boot (Fedora boots fine). > > If you want to test, you can use my ATF tree: > > https://git.theobroma-systems.com/puma-u-boot.git/log/?h=puma-v2019.04-atf > > Status for booting from SPI NOR is, that ATF will be branched to, > but then the board hangs. However, I haven't analyzed the situation > in detail yet. > > BR > Christoph > >> Cheers, >> >> Mark >> >>> configs/puma-rk3399_defconfig | 1 - >>> 1 file changed, 1 deletion(-) >>> >>> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig >>> index 964464ac0f..f4c5168011 100644 >>> --- a/configs/puma-rk3399_defconfig >>> +++ b/configs/puma-rk3399_defconfig >>> @@ -33,7 +33,6 @@ CONFIG_SPL_I2C_SUPPORT=y >>> CONFIG_SPL_POWER_SUPPORT=y >>> CONFIG_SPL_SPI_LOAD=y >>> CONFIG_SPL_ATF=y >>> -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y >>> CONFIG_CMD_BOOTZ=y >>> CONFIG_CMD_GPT=y >>> CONFIG_CMD_I2C=y >>> -- >>> 2.11.0 >>> >>> _______________________________________________ >>> U-Boot mailing list >>> U-Boot@lists.denx.de >>> https://lists.denx.de/listinfo/u-boot > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot