The commong initialization code manually initializes the GPIO
even when OF_CONTROL does it, so we can reduce the code size a
bit by not doing it manually when we have device tree support.
Using the omap3_logic board (dm3730), the sizes shrunk:
Before:
text data bss dec hex filename
561066 28596 116880 706542 ac7ee u-boot
55245 1605 1888 58738 e572 spl/u-boot-spl
After
text data bss dec hex filename
560898 28548 116872 706318 ac70e u-boot
55121 1557 1888 58566 e4c6 spl/u-boot-spl
Signed-off-by: Adam Ford <aford...@gmail.com>
---
V2: Fix accidentally checked in #if 1 instead of what I wanted
diff --git a/arch/arm/mach-omap2/omap3/board.c
b/arch/arm/mach-omap2/omap3/board.c
index 2d25fc60a0..658ef8c1f1 100644
--- a/arch/arm/mach-omap2/omap3/board.c
+++ b/arch/arm/mach-omap2/omap3/board.c
@@ -34,6 +34,8 @@ static void omap3_invalidate_l2_cache_secure(void);
#endif
#ifdef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(OF_CONTROL)
+/* Manually initialize GPIO banks when OF_CONTROL doesn't */
static const struct omap_gpio_platdata omap34xx_gpio[] = {
{ 0, OMAP34XX_GPIO1_BASE },
{ 1, OMAP34XX_GPIO2_BASE },
@@ -51,7 +53,7 @@ U_BOOT_DEVICES(omap34xx_gpios) = {
{ "gpio_omap", &omap34xx_gpio[4] },
{ "gpio_omap", &omap34xx_gpio[5] },
};
-
+#endif
#else
static const struct gpio_bank gpio_bank_34xx[6] = {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
