> Subject: [PATCH] mmc: Avoid HS400 mode when accessing boot partitions > > According to JEDEC JESD84-B51.pdf section 6.3.3 Boot operation , > HS200 & HS400 mode is not supported during boot operation. The U-Boot > code currently only applies this restriction to HS200 mode, extend this to > HS400 mode as well. > > Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> > Cc: Jean-Jacques Hiblot <jjhib...@ti.com> > Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org> > Cc: Peng Fan <peng....@nxp.com> > --- > drivers/mmc/mmc.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index > 456c1b4cc9..71b52c6cf2 100644 > --- a/drivers/mmc/mmc.c > +++ b/drivers/mmc/mmc.c > @@ -905,14 +905,14 @@ static int mmc_set_capacity(struct mmc *mmc, int > part_num) > return 0; > } > > -#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) > +#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || > +CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) > static int mmc_boot_part_access_chk(struct mmc *mmc, unsigned int > part_num) { > int forbidden = 0; > bool change = false; > > if (part_num & PART_ACCESS_MASK) > - forbidden = MMC_CAP(MMC_HS_200); > + forbidden = MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400); > > if (MMC_CAP(mmc->selected_mode) & forbidden) { > pr_debug("selected mode (%s) is forbidden for part %d\n",
Reviewed-by: Peng Fan <peng....@nxp.com> > -- > 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot