Hi Fabio,

On Wed, Jun 5, 2019 at 4:29 PM Igor Opaniuk <igor.opan...@gmail.com> wrote:
>
> Hi Fabio,
>
> On Wed, Jun 5, 2019 at 1:06 AM Fabio Estevam <feste...@gmail.com> wrote:
> >
> > Hi Igor,
> >
> > On Mon, Jun 3, 2019 at 6:06 PM Igor Opaniuk <igor.opan...@gmail.com> wrote:
> >
> > > +&lcdif {
> > > +       u-boot,dm-pre-reloc;
> > > +       status = "okay";
> > > +
> > > +       display-timings {
> > > +               native-mode = <&timing_vga>;
> > > +
> > > +               /* Standard VGA timing */
> > > +               timing_vga: 640x480 {
> > > +                       u-boot,dm-pre-reloc;
> > > +                       clock-frequency = <25175000>;
> > > +                       hactive = <640>;
> > > +                       vactive = <480>;
> > > +                       hback-porch = <48>;
> > > +                       hfront-porch = <16>;
> > > +                       vback-porch = <33>;
> > > +                       vfront-porch = <10>;
> > > +                       hsync-len = <96>;
> > > +                       vsync-len = <2>;
> > > +
> > > +                       de-active = <1>;
> > > +                       hsync-active = <0>;
> > > +                       vsync-active = <0>;
> > > +                       pixelclk-active = <0>
> >
> > This is the deprecated style mxsfb fbdev binding.
> >
> > In the kernel we no longer use this style as documented in
> > Documentation/devicetree/bindings/display/mxsfb.txt
> >
> > If we follow this route in U-Boot then we will diverge from the kernel
> > recommended bindings.
>
> Initially I copy-pasted the whole DT node "as it is" from the linux
> kernel dts, but found out that existing
> DT wrapper for parsing display timings
> (ofnode_decode_display_timing())) isn't able to parse it properly,
> so I just changed it to conform the same structure as similar nodes in
> other DTS files.
>
> Thanks for letting me know, probably ofnode_decode_display_timing()
> implementation should
> be adjusted as well.

Nevermind, I've double-checked ofnode_decode_display_timing()
implementation and all instances of display-timings nodes,
it definitely should be able parse the same structure as defined in
the Linux devicetree bindings.

Probably I just messed up with something.

> Regards,
> Igor
>
>
>
> --
> Best regards - Freundliche Grüsse - Meilleures salutations
>
> Igor Opaniuk
>
> mailto: igor.opan...@gmail.com
> skype: igor.opanyuk
> +380 (93) 836 40 67
> http://ua.linkedin.com/in/iopaniuk



-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opan...@gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to