Hi Marek,
> On Sun, 12 May 2019 23:34:52 +0200
> Marek Vasut <ma...@denx.de> wrote:
>
> > Use CONFIG_IS_ENABLED(WDT) to permit use of WDT in SPL without DM,
> > while the full U-Boot can use rich DM/DT WDT driver.
> >
> > Signed-off-by: Marek Vasut <ma...@denx.de>
> > Cc: Peng Fan <peng....@freescale.com>
> > Cc: Stefano Babic <sba...@denx.de>
> > ---
> > common/board_r.c | 2 +-
> > common/spl/spl.c | 2 +-
> > drivers/watchdog/Makefile | 2 +-
> > include/asm-generic/global_data.h | 2 +-
> > include/wdt.h | 2 +-
> > 5 files changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/common/board_r.c b/common/board_r.c
> > index 150e8cd424..988e40abb2 100644
> > --- a/common/board_r.c
> > +++ b/common/board_r.c
> > @@ -678,7 +678,7 @@ static init_fnc_t init_sequence_r[] = {
> > #ifdef CONFIG_DM
> > initr_dm,
> > #endif
> > -#if defined(CONFIG_WDT)
> > +#if CONFIG_IS_ENABLED(WDT)
> > initr_watchdog,
> > #endif
> > #if defined(CONFIG_ARM) || defined(CONFIG_NDS32) ||
> > defined(CONFIG_RISCV) || \ diff --git a/common/spl/spl.c
> > b/common/spl/spl.c index 0a6a47c202..f22f854718 100644
> > --- a/common/spl/spl.c
> > +++ b/common/spl/spl.c
> > @@ -601,7 +601,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
> > spl_board_init();
> > #endif
> >
> > -#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && defined(CONFIG_WDT)
> > +#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && CONFIG_IS_ENABLED(WDT)
> > initr_watchdog();
> > #endif
> >
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index 40b2f4bc66..4b94ae988c 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -16,7 +16,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> > obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> > obj-$(CONFIG_TANGIER_WATCHDOG) += tangier_wdt.o
> > obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> > -obj-$(CONFIG_WDT) += wdt-uclass.o
> > +obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
> > obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
> > obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
> > obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
> > diff --git a/include/asm-generic/global_data.h
> > b/include/asm-generic/global_data.h index 02a3ed6838..7c2220643b
> > 100644 --- a/include/asm-generic/global_data.h
> > +++ b/include/asm-generic/global_data.h
> > @@ -137,7 +137,7 @@ typedef struct global_data {
> > #if defined(CONFIG_TRANSLATION_OFFSET)
> > fdt_addr_t translation_offset; /* optional
> > translation offset */ #endif
> > -#if defined(CONFIG_WDT)
> > +#if CONFIG_IS_ENABLED(WDT)
> > struct udevice *watchdog_dev;
> > #endif
> > } gd_t;
> > diff --git a/include/wdt.h b/include/wdt.h
> > index aa77d3e9b4..5bcff24ab3 100644
> > --- a/include/wdt.h
> > +++ b/include/wdt.h
> > @@ -106,7 +106,7 @@ struct wdt_ops {
> > int (*expire_now)(struct udevice *dev, ulong flags);
> > };
> >
> > -#if defined(CONFIG_WDT)
> > +#if CONFIG_IS_ENABLED(WDT)
> > #ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
> > #define CONFIG_WATCHDOG_TIMEOUT_MSECS (60 * 1000)
> > #endif
>
> Tested-by: Lukasz Majewski <lu...@denx.de>
>
> Test HW: display5 i.MX6Q device
>
Unfortunately this series causes build break when run on Travis-CI for
some Atmel/Microchip:
arm: + picosam9g45
+lib/built-in.o: In function `udelay':
+lib/time.c:167: undefined reference to `watchdog_reset'
+drivers/built-in.o: In function `atmel_serial_getc':
+drivers/serial/atmel_usart.c:103: undefined reference to
`watchdog_reset' +make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
14 38 1 /53 axm
boards.cfg is up to date. Nothing to do.
Summary of current source for 53 boards (2 threads, 1 job per thread)
u-boot master SHA1: e1a2ed7180adeefb6164239a18249dca5701319d
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> lu...@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgp8q1IOwpEHn.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
