> This commit is necessary to be able to re-use the pinctrl code in early > SPL to properly configure pins. > The problem is that those "static" structures (without explicit > initialization) are placed in the SDRAM area, which corresponds to > u-boot proper (not even SPL). > Hence, when one wants to configure pins before relocation via DTS/DM, > the board hangs (imx6q SoC powered one) as only OCRAM area is available > (0x009xxxxx). > This commit prevents from this issue by moving the imx6_pinctrl_soc_info > structure to data section (from BSS). > Signed-off-by: Lukasz Majewski <lu...@denx.de> > Reviewed-by: Peng Fan <peng....@nxp.com>
Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
