Place dtbs under SoC level rather than board level.
imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were
placed under the board config option, so move them
to SoC level.
This also aligns with the kernel dts Makefile format.
Signed-off-by: Fabio Estevam <feste...@gmail.com>
---
arch/arm/dts/Makefile | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 39c5491015..0fa82f5f2e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -541,9 +541,7 @@ dtb-$(CONFIG_MX6Q) += \
imx6-apalis.dtb \
imx6q-display5.dtb \
imx6q-logicpd.dtb \
- imx6q-novena.dtb
-
-dtb-$(CONFIG_TARGET_TBS2910) += \
+ imx6q-novena.dtb \
imx6q-tbs2910.dtb
dtb-$(CONFIG_MX6QDL) += \
@@ -553,6 +551,7 @@ dtb-$(CONFIG_MX6QDL) += \
imx6dl-mamoj.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-wandboard-revb1.dtb \
imx6q-cm-fx6.dtb \
imx6q-icore.dtb \
imx6q-icore-mipi.dtb \
@@ -562,9 +561,6 @@ dtb-$(CONFIG_MX6QDL) += \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
-dtb-$(CONFIG_TARGET_WANDBOARD) += \
- imx6dl-wandboard-revb1.dtb
-
dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
