This also enables mtd configs which are required by nandbcb command. This command would be used to configure boot control block(BCB) while writing spl image on nand device.
Signed-off-by: Shyam Saini <shyam.sa...@amarulasolutions.com> --- configs/imx6qdl_icore_mmc_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index b65979967a..620d49f954 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -15,6 +15,7 @@ CONFIG_DEBUG_UART_BASE=0x021f0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_LIBDISK_SUPPORT=y # CONFIG_CMD_BMODE is not set +CONFIG_CMD_NANDBCB=y CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y @@ -58,6 +59,9 @@ CONFIG_SYS_I2C_MXC=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y CONFIG_NAND_MXS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" +CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)" CONFIG_PHYLIB=y CONFIG_PHY_SMSC=y CONFIG_FEC_MXC=y -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot