Hi Marek, Looks like CD is working fine with TI AM3358X SOC based targets.
Ran a quick test after looking at the discussion, posting the results which might be of some help. In this test, mmc part is not printing the partition table of the previous card, instead it prints the partition table of the latest card which is inserted. Hope the test is inline with the discussion. Please ignore if the results doesn't make any sense. Tested on U-Boot v2019.07-rc1 8GB card inserted => mmc rescan => mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 262144 7d8cd224-01 0b Boot 2 264192 15259648 7d8cd224-02 83 => mmc info Device: OMAP SD/MMC Manufacturer ID: 3 OEM: 5344 Name: SS08G Bus Speed: 48000000 Mode : SD High Speed (50MHz) Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes removed 8GB card and inserted 2GB card => mmc rescan => mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 262144 000c0116-01 0b Boot 2 264192 3647488 000c0116-02 83 => mmc info Device: OMAP SD/MMC Manufacturer ID: 1b OEM: 534d Name: 00000 Bus Speed: 48000000 Mode : SD High Speed (50MHz) Rd Block Len: 512 SD version 3.0 High Capacity: No Capacity: 1.9 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes Thanks Regards -- Suniel Mahesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot