Thanks Wolfgang, The board is resetting within u-boot before Linux starts to load. I added the WATCHDOG_RESET call in common/image.c before and after it is loading the device tree which is where it gets reset. I figured that if I reset the watchdog before that process it will give me more time so that Linux can load and take over. It seems like code was already there to handle the reset in memmove_wd but it does not seem to be working. The Linux watchdog code is working great. If I remove watchdog from u-boot and just do it in Linux it works just fine. I enable BookE driver in Linux and that works. The other thing that is difficult is creating a /dev/watchdog node in the blob. Currently I need to do that in a startup script. I would like to have that in the blob.
The watchdog_reset function is trying to prevent the interrupt from happening. It does seem to do the correct thing based on the PPC440 UG. Thanks for the help. Mark -----Original Message----- From: Wolfgang Denk [mailto:w...@denx.de] Sent: Friday, June 04, 2010 12:47 PM To: Mark Maestas Cc: Detlev Zundel; Stefan Roese; u-boot@lists.denx.de Subject: Re: [U-Boot] Watchdog support for ppc4xx Dear "Mark Maestas", In message <b02fcc6065c3164c8228cf04ab049eac0114c...@srv-01.aplabs.com> you wrote: > > I am not having luck with watchdog enabled on the ppc4xx target. The > board is doing a reset before Linux gets a chance to load. I have added Please define exactly what you mean by "before Linux gets a chance to load" - is it resetting in U-Boot, or after passsing control to the Linux kernel? > more WATCHDOG_RESET commands in the image file just to see if that helps What does "in the image file" mean? > and it does not seem to. Even though the reset function gets called it > is still getting reset. According to the ppc 440 documentation the By "reset function" you actually mean the code that is supposed to trigger the watchdog? Otherwise - the reset function is supposed to reset the system, so everthing would be OK then. > TSR[WIS] bit should get cleared to reset the timer and the code is doing > that. I don't understand why the board keeps resetting. This depends on the hardware, and obviously on the code doing this (keep in mind that using I/O accessors is mandatory these days). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de I haven't lost my mind -- it's backed up on tape somewhere. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot