Remove obsolete legacy usbboot wrapper, as distroboot can handle
booting from USB drivers.
Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
---
include/configs/colibri_imx6.h | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 86f3f0d4fa..147f801353 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -165,25 +165,6 @@
"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
"sdrootpart=2\0"
-#define USB_BOOTCMD \
- "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw,noatime " \
- "rootfstype=ext4 rootwait\0" \
- "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
- "setenv bootargs ${defargs} ${setupargs} " \
- "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
- "run usbdtbload; " \
- "load usb ${usbdev}:${usbbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "usbbootpart=1\0" \
- "usbdev=0\0" \
- "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
- "${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && " \
- "true\0" \
- "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
- "usbrootpart=2\0"
-
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
@@ -201,7 +182,6 @@
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
- USB_BOOTCMD \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
