Hi, May I know if this patch is still under review ?
I have converted OMAP3 watchdog driver into driver model for TI AM33XX based SOC and tested corresponding patches on BeagleBone Black board. Build was successful but board goes into a loop when turned on/runtime, problem identified and is in sync with Weijie Gao's explanation and his patch for such behaviour (please follow this thread for explanation). When initr_watchdog is moved/placed just after initr_serial, board is behaving normal. Tested on BeagleBone Black. Please suggest if there are any workarounds for this problem. Regards -- Suniel Mahesh Embedded Linux, Kernel & U-Boot engineer https://github.com/sunielmahesh www.tuxtrons.com https://github.com/techveda Hyderabad, India _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot