[U-Boot] [PATCH 5/7] mmc: fsl_esdhc_imx: add HS400 Enhanced strobe support

[Peng Fan]

Implement set_enhanced_strobe hook for fsl_esdhc_imx,
,in esdhc_set_timing and esdhc_change_pinstate, also handle HS400_ES.

Signed-off-by: Peng Fan <peng....@nxp.com>
---
 drivers/mmc/fsl_esdhc_imx.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 32d34ccf7c..c496780f2c 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -703,6 +703,7 @@ static int esdhc_change_pinstate(struct udevice *dev)
        case UHS_SDR104:
        case MMC_HS_200:
        case MMC_HS_400:
+       case MMC_HS_400_ES:
                ret = pinctrl_select_state(dev, "state_200mhz");
                break;
        default:
@@ -773,6 +774,7 @@ static int esdhc_set_timing(struct mmc *mmc)
                writel(mixctrl, &regs->mixctrl);
                break;
        case MMC_HS_400:
+       case MMC_HS_400_ES:
                mixctrl |= MIX_CTRL_DDREN | MIX_CTRL_HS400_EN;
                writel(mixctrl, &regs->mixctrl);
                esdhc_set_strobe_dll(mmc);
@@ -1594,6 +1596,19 @@ static int fsl_esdhc_set_ios(struct udevice *dev)
        return esdhc_set_ios_common(priv, &plat->mmc);
 }
 
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+static void fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
+{
+       struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+       struct fsl_esdhc *regs = priv->esdhc_regs;
+       u32 m;
+
+       m = readl(&regs->mixctrl);
+       m |= MIX_CTRL_HS400_ES;
+       writel(m, &regs->mixctrl);
+}
+#endif
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
        .get_cd         = fsl_esdhc_get_cd,
        .send_cmd       = fsl_esdhc_send_cmd,
@@ -1601,6 +1616,9 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #ifdef MMC_SUPPORTS_TUNING
        .execute_tuning = fsl_esdhc_execute_tuning,
 #endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+       .set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
+#endif
 };
 #endif
 
-- 
2.16.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot