On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC
hardware boot partitions. When there are no boot partitions (i.e. SD
card) the ROM skips the first sector that usually contains the (logical)
partition table. Since the generated .kwb image contains the main U-Boot
image in a fixed location (0x140 sectors by default), we end up with the
main U-Boot image in offset of 1 sector. The current workaround is to
manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to
compensate for that.
This patch uses the run-time detected boot partition to determine the
right offset of the main U-Boot partition. The generated .kwb image is
now compatible with both eMMC boot partition, and SD card main data
partition.
Signed-off-by: Baruch Siach <bar...@tkos.co.il>
---
common/spl/Kconfig | 12 ++++++++++++
common/spl/spl_mmc.c | 28 +++++++++++++++++++++-------
2 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 9fe99681305c..47ee59118d27 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -280,6 +280,18 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
+config SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET
+ hex "U-Boot main hardware partition image offset"
+ depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+ default 0x0
+ help
+ On some platforms SPL location depends on hardware partition. The ROM
+ code skips the MBR sector when loading SPL from main hardware data
+ partition. This adds offset to the main U-Boot image. Set this symbol
+ to the number of skipped sectors.
+
+ If unsure, leave the default.
+
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
bool "MMC Raw mode: by partition"
help
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 324d91c88404..7c7d9ccae4cf 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -49,6 +49,20 @@ static ulong h_spl_load_read(struct spl_load_info *load,
ulong sector,
return blk_dread(mmc_get_blk_desc(mmc), sector, count, buf);
}
+#if IS_ENABLED(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR)
+static unsigned long spl_mmc_raw_uboot_sector(int part)
+{
+ unsigned long raw_sector = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
+
+ if (part == 0)
+ raw_sector += CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET;
+
+ return raw_sector;
+}
+#else
+static unsigned long spl_mmc_raw_uboot_sector(int part) { return 0; }
+#endif
+
static __maybe_unused
int mmc_load_image_raw_sector(struct spl_image_info *spl_image,
struct mmc *mmc, unsigned long sector)
@@ -307,7 +321,7 @@ int spl_mmc_load_image(struct spl_image_info *spl_image,
struct mmc *mmc = NULL;
u32 boot_mode;
int err = 0;
- __maybe_unused int part;
+ __maybe_unused int part = 0;
err = spl_mmc_find_device(&mmc, bootdev->boot_device);
if (err)
@@ -364,12 +378,12 @@ int spl_mmc_load_image(struct spl_image_info *spl_image,
if (!err)
return err;
#endif
-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
- err = mmc_load_image_raw_sector(spl_image, mmc,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
- if (!err)
- return err;
-#endif
+ if (IS_ENABLED(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR)) {
+ err = mmc_load_image_raw_sector(spl_image, mmc,
+ spl_mmc_raw_uboot_sector(part));
+ if (!err)
+ return err;
+ }
/* If RAW mode fails, try FS mode. */
case MMCSD_MODE_FS:
debug("spl: mmc boot mode: fs\n");
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
