Firmware Configuration Block(FCB) for imx6ul(l) needs to be BCH encoded. This patch depends on [1].
[1]: https://patchwork.ozlabs.org/project/uboot/list/?series=113810 Signed-off-by: Parthiban Nallathambi <p...@denx.de> --- arch/arm/mach-imx/Kconfig | 1 + arch/arm/mach-imx/cmd_nandbcb.c | 72 ++++++++++++++++++++++++++++++++- 2 files changed, 71 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index aeb5493488..175bed601e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -74,6 +74,7 @@ config CMD_HDMIDETECT config CMD_NANDBCB bool "i.MX6 NAND Boot Control Block(BCB) command" depends on NAND && CMD_MTDPARTS + select BCH if MX6UL || MX6ULL default y if ARCH_MX6 && NAND_MXS help Unlike normal 'nand write/erase' commands, this command update diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c index 065b814b2e..34176ee6e4 100644 --- a/arch/arm/mach-imx/cmd_nandbcb.c +++ b/arch/arm/mach-imx/cmd_nandbcb.c @@ -14,8 +14,10 @@ #include <asm/io.h> #include <jffs2/jffs2.h> +#include <linux/bch.h> #include <linux/mtd/mtd.h> +#include <asm/arch/sys_proto.h> #include <asm/mach-imx/imx-nandbcb.h> #include <asm/mach-imx/imximage.cfg> #include <mxs_nand.h> @@ -25,6 +27,66 @@ #define BF_VAL(v, bf) (((v) & bf##_MASK) >> bf##_OFFSET) #define GETBIT(v, n) (((v) >> (n)) & 0x1) +static uint8_t reverse_bit(uint8_t b) +{ + b = (b & 0xf0) >> 4 | (b & 0x0f) << 4; + b = (b & 0xcc) >> 2 | (b & 0x33) << 2; + b = (b & 0xaa) >> 1 | (b & 0x55) << 1; + + return b; +} + +static void encode_bch_ecc(void *buf, struct fcb_block *fcb, int eccbits) +{ + int i, j, m = 13; + int blocksize = 128; + int numblocks = 8; + int ecc_buf_size = (m * eccbits + 7) / 8; + struct bch_control *bch = init_bch(m, eccbits, 0); + u8 *ecc_buf = kzalloc(ecc_buf_size, GFP_KERNEL); + u8 *tmp_buf = kzalloc(blocksize * numblocks, GFP_KERNEL); + u8 *psrc, *pdst; + + /* + * The blocks here are bit aligned. If eccbits is a multiple of 8, + * we just can copy bytes. Otherwiese we must move the blocks to + * the next free bit position. + */ + WARN_ON(eccbits % 8); + + memcpy(tmp_buf, fcb, sizeof(*fcb)); + + for (i = 0; i < numblocks; i++) { + memset(ecc_buf, 0, ecc_buf_size); + psrc = tmp_buf + i * blocksize; + pdst = buf + i * (blocksize + ecc_buf_size); + + /* copy data byte aligned to destination buf */ + memcpy(pdst, psrc, blocksize); + + /* + * imx-kobs use a modified encode_bch which reverse the + * bit order of the data before calculating bch. + * Do this in the buffer and use the bch lib here. + */ + for (j = 0; j < blocksize; j++) + psrc[j] = reverse_bit(psrc[j]); + + encode_bch(bch, psrc, blocksize, ecc_buf); + + /* reverse ecc bit */ + for (j = 0; j < ecc_buf_size; j++) + ecc_buf[j] = reverse_bit(ecc_buf[j]); + + /* Here eccbuf is byte aligned and we can just copy it */ + memcpy(pdst + blocksize, ecc_buf, ecc_buf_size); + } + + free(ecc_buf); + free(tmp_buf); + free_bch(bch); +} + static u8 calculate_parity_13_8(u8 d) { u8 p = 0; @@ -231,8 +293,14 @@ static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size, goto dbbt_data_page_err; } - memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block)); - encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + 12 + 512, 512); + if (is_mx6ul() || is_mx6ull()) { + /* 40 bit BCH, for i.MX6UL(L) */ + encode_bch_ecc(fcb_raw_page + 32, fcb, 40); + } else { + memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block)); + encode_hamming_13_8(fcb_raw_page + 12, + fcb_raw_page + 12 + 512, 512); + } /* * Set the first and second byte of OOB data to 0xFF, not 0x00. These * bytes are used as the Manufacturers Bad Block Marker (MBBM). Since -- 2.21.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
