This patchset adds initial support for the NXP LS1021A-TSN board,
an evaluation platform built in partnership with VVDN/Argonboards
for some IEEE 802.1 TSN features.

It features a cleaned-up U-Boot board support taken from OpenIL,
as well as an eTSEC migration to DM_ETH.  I picked up Bin Meng's
patch that converts the LS1021A-TWR (different board, same SoC):
https://lists.denx.de/pipermail/u-boot/2018-May/330096.html
verified it on the LS1021A-TSN board I am submitting, and made a
few adjustments where necessary.

TODO items:
- Make the eTSEC driver support fixed-link interfaces (necessary
  for the enet2 <-> sja1105 internal port)
- Add driver for SJA1105 switch
- Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and
  expose the TBI PHY to mdio commands (useful for debugging),
  once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html
  is merged.

Bin Meng (1):
  arm: ls1021atwr: Convert to use driver model TSEC driver

Jianchao Wang (1):
  Add support for the NXP LS1021A-TSN board

Vladimir Oltean (7):
  net: tsec: Refactor the readout of the tbi-handle property
  net: tsec: Fix offset of MDIO registers for DM_ETH
  net: tsec: Reverse Christmas tree notation
  net: tsec: Make errors visible
  net: tsec: Common handling of MAC station address for DM_ETH
  net: tsec: Change compatible strings to match Linux
  configs: ls1021atwr: Fix distro_bootcmd for QSPI boot

 arch/arm/Kconfig                              |  14 +
 arch/arm/cpu/armv7/ls102xa/cpu.c              |   2 +-
 arch/arm/cpu/armv7/ls102xa/fdt.c              |  10 +
 arch/arm/dts/Makefile                         |   2 +-
 arch/arm/dts/ls1021a-tsn.dts                  |  77 ++++++
 arch/arm/dts/ls1021a-twr.dtsi                 |  32 +++
 arch/arm/dts/ls1021a.dtsi                     |  30 +-
 board/freescale/ls1021atsn/Kconfig            |  18 ++
 board/freescale/ls1021atsn/MAINTAINERS        |   8 +
 board/freescale/ls1021atsn/Makefile           |   3 +
 board/freescale/ls1021atsn/README.rst         |  97 +++++++
 board/freescale/ls1021atsn/ls1021atsn.c       | 260 ++++++++++++++++++
 board/freescale/ls1021atsn/ls102xa_pbi.cfg    |  15 +
 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg |   8 +
 board/freescale/ls1021atwr/ls1021atwr.c       |  38 ---
 configs/ls1021atsn_qspi_defconfig             |  79 ++++++
 configs/ls1021atsn_sdcard_defconfig           |  91 ++++++
 configs/ls1021atwr_nor_SECURE_BOOT_defconfig  |   2 +
 configs/ls1021atwr_nor_defconfig              |   2 +
 configs/ls1021atwr_nor_lpuart_defconfig       |   2 +
 configs/ls1021atwr_qspi_defconfig             |   2 +
 ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig |   2 +
 configs/ls1021atwr_sdcard_ifc_defconfig       |   2 +
 configs/ls1021atwr_sdcard_qspi_defconfig      |   2 +
 doc/device-tree-bindings/net/fsl-tsec-phy.txt |   4 +-
 drivers/net/tsec.c                            |  59 ++--
 include/configs/ls1021atsn.h                  | 250 +++++++++++++++++
 include/configs/ls1021atwr.h                  |  30 +-
 include/tsec.h                                |   4 +-
 29 files changed, 1038 insertions(+), 107 deletions(-)
 create mode 100644 arch/arm/dts/ls1021a-tsn.dts
 create mode 100644 board/freescale/ls1021atsn/Kconfig
 create mode 100644 board/freescale/ls1021atsn/MAINTAINERS
 create mode 100644 board/freescale/ls1021atsn/Makefile
 create mode 100644 board/freescale/ls1021atsn/README.rst
 create mode 100644 board/freescale/ls1021atsn/ls1021atsn.c
 create mode 100644 board/freescale/ls1021atsn/ls102xa_pbi.cfg
 create mode 100644 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg
 create mode 100644 configs/ls1021atsn_qspi_defconfig
 create mode 100644 configs/ls1021atsn_sdcard_defconfig
 create mode 100644 include/configs/ls1021atsn.h

-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to