Add devicetree support for iMXQXP AI_ML board from Einfochips.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi | 117 +++++++++++++
arch/arm/dts/fsl-imx8qxp-ai_ml.dts | 181 +++++++++++++++++++++
3 files changed, 299 insertions(+)
create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e6680e5e98..7834a158da 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -614,6 +614,7 @@ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
dtb-$(CONFIG_ARCH_IMX8) += \
fsl-imx8qm-apalis.dtb \
fsl-imx8qm-mek.dtb \
+ fsl-imx8qxp-ai_ml.dtb \
fsl-imx8qxp-colibri.dtb \
fsl-imx8qxp-mek.dtb
diff --git a/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
b/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
new file mode 100644
index 0000000000..3ca53bb945
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Linaro Ltd.
+ */
+
+&{/imx8qx-pm} {
+
+ u-boot,dm-spl;
+};
+
+&mu {
+ u-boot,dm-spl;
+};
+
+&clk {
+ u-boot,dm-spl;
+};
+
+&iomuxc {
+ u-boot,dm-spl;
+};
+
+&pd_lsio {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio0 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio1 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio2 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio3 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio4 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio5 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio6 {
+ u-boot,dm-spl;
+};
+
+&pd_lsio_gpio7 {
+ u-boot,dm-spl;
+};
+
+&pd_conn {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch0 {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch1 {
+ u-boot,dm-spl;
+};
+
+&pd_conn_sdch2 {
+ u-boot,dm-spl;
+};
+
+&gpio0 {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&gpio3 {
+ u-boot,dm-spl;
+};
+
+&gpio4 {
+ u-boot,dm-spl;
+};
+
+&gpio5 {
+ u-boot,dm-spl;
+};
+
+&gpio6 {
+ u-boot,dm-spl;
+};
+
+&gpio7 {
+ u-boot,dm-spl;
+};
+
+&lpuart2 {
+ u-boot,dm-spl;
+};
+
+&usdhc1 {
+ u-boot,dm-spl;
+};
+
+&usdhc2 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/fsl-imx8qxp-ai_ml.dts
b/arch/arm/dts/fsl-imx8qxp-ai_ml.dts
new file mode 100644
index 0000000000..aa85caaff5
--- /dev/null
+++ b/arch/arm/dts/fsl-imx8qxp-ai_ml.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "fsl-imx8qxp.dtsi"
+#include "fsl-imx8qxp-ai_ml-u-boot.dtsi"
+
+/ {
+ model = "Einfochips i.MX8QXP AI_ML";
+ compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+ chosen {
+ bootargs = "console=ttyLP2,115200
earlycon=lpuart32,0x5a080000,115200";
+ stdout-path = &lpuart2;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ };
+};
+
+&lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ status = "okay";
+};
+
+&lpuart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ status = "okay";
+};
+
+&lpuart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart3>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,ar8031-phy-fixup;
+ fsl,magic-packet;
+ phy-reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <10>;
+ phy-reset-post-delay = <150>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
+
+/* LS-I2C1 */
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ no-sd;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD
0x000014a0
+ SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD
0x000014a0
+ SC_P_ENET0_MDC_CONN_ENET0_MDC
0x06000020
+ SC_P_ENET0_MDIO_CONN_ENET0_MDIO
0x06000020
+ SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL
0x06000020
+ SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC
0x06000020
+ SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0
0x06000020
+ SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1
0x06000020
+ SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2
0x06000020
+ SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3
0x06000020
+ SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC
0x06000020
+ SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL
0x06000020
+ SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0
0x06000020
+ SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1
0x06000020
+ SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2
0x06000020
+ SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3
0x06000020
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ SC_P_USB_SS3_TC1_ADMA_I2C1_SCL
0x06000021
+ SC_P_USB_SS3_TC3_ADMA_I2C1_SDA
0x06000021
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ SC_P_UART0_RX_ADMA_UART0_RX
0X06000020
+ SC_P_UART0_TX_ADMA_UART0_TX
0X06000020
+ >;
+ };
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ SC_P_UART1_RX_ADMA_UART1_RX
0X06000020
+ SC_P_UART1_TX_ADMA_UART1_TX
0X06000020
+ >;
+ };
+
+ pinctrl_lpuart2: lpuart2grp {
+ fsl,pins = <
+ SC_P_UART2_RX_ADMA_UART2_RX
0X06000020
+ SC_P_UART2_TX_ADMA_UART2_TX
0X06000020
+ >;
+ };
+
+ pinctrl_lpuart3: lpuart3grp {
+ fsl,pins = <
+ SC_P_FLEXCAN2_RX_ADMA_UART3_RX
0X06000020
+ SC_P_FLEXCAN2_TX_ADMA_UART3_TX
0X06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ SC_P_EMMC0_CLK_CONN_EMMC0_CLK
0x06000041
+ SC_P_EMMC0_CMD_CONN_EMMC0_CMD
0x00000021
+ SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0
0x00000021
+ SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1
0x00000021
+ SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2
0x00000021
+ SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3
0x00000021
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ SC_P_USDHC1_CLK_CONN_USDHC1_CLK
0x06000041
+ SC_P_USDHC1_CMD_CONN_USDHC1_CMD
0x00000021
+ SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0
0x00000021
+ SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1
0x00000021
+ SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2
0x00000021
+ SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3
0x00000021
+ SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT
0x00000021
+ >;
+ };
+};
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
