Hello, I am trying to build u-boot v2019.07 with zynq_z_turn_defconfig config. I obtain spl/boot.bin file that is placed at the first FAT partition as required by BootROM docs. I also put u-boot.img and u-boot.bin at the same partition. However, when I powered the board, nothing happening at all.
I've checked that when I replace boot.bin with a binary provided on the vendor CD disk, the BootROM is able to find and run vendor bootloader. I even don't see SPL banner when try to rebuild u-boot myself even CONFIG_DEBUG_UART is enabled in the config. How could I figure out what is happening? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot