On 7/23/2019 8:22 PM, Nevo Hed wrote:
For context from upstream linux,
https://github.com/torvalds/linux/commit/f66b2aff46eaf0825dbe1560e28fcb845dd2a215
I was intending to submit the parallel change here once fully tested
end-end on our hardware,
but if not too late my proposal is to name the above nodes as
"cpm-mdio" & "cps-mdio"
I'm OK with "-mdio", I can send a v2.
Please node that I used a property called 'device-name' rather than
'mdio-name', I'm not sure if you want to pick that up too or not.
Thanks!
Alex
On Tue, Jul 23, 2019 at 1:03 PM Nevo Hed <nhed+ub...@starry.com> wrote:
Sorry for the late input
The cp110s have an mdio and an xmdio so
Locally I have been naming them cpm-xmdio, cpm-mdio, cps-xmdio, cps-mdio
I knew the new field is coming but didn't catch that the 'dtsi's patch
[also apologies if you get this a second time]
On Mon, Jul 22, 2019 at 8:30 PM Joe Hershberger <joe.hershber...@ni.com> wrote:
On Wed, Jul 17, 2019 at 10:12 AM Alex Marginean
<alexandru.margin...@nxp.com> wrote:
Implicitly Marvell MDIO driver uses DT node names for devices, but in this
case that is not unique. Set MDIO device names for master/slave to
cpm/cps.
Signed-off-by: Alex Marginean <alexm.ossl...@gmail.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
