On 24.07.19 16:39, Andrei Gherzan wrote:
From: Matthias Brugger <mbrug...@suse.com>
Devices of bcm283x have different base address, depending if they are on
bcm2835 or bcm2836/7. Use BCM283x_BASE depending on the SoC you want to
build and only add the offset in the header files.
Signed-off-by: Matthias Brugger <mbrug...@suse.com>
Signed-off-by: Andrei Gherzan <and...@balena.io>
---
arch/arm/mach-bcm283x/Kconfig | 5 +++++
arch/arm/mach-bcm283x/include/mach/mbox.h | 6 +-----
arch/arm/mach-bcm283x/include/mach/sdhci.h | 6 +-----
arch/arm/mach-bcm283x/include/mach/timer.h | 6 +-----
arch/arm/mach-bcm283x/include/mach/wdog.h | 6 +-----
5 files changed, 9 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index 3eb5a9a897..8e69914a83 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -141,4 +141,9 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "rpi"
+config BCM283x_BASE
+ hex
+ default "0x20000000" if BCM2835
+ default "0x3f000000" if BCM2836 || BCM2837
How hard would it be to make the base a global variable instead and just
set it early on board init based on the FDT or maybe even CPU core
revision registers?
That would allow us to support RPi3 & 4 with the same U-Boot binary.
Alex
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot