Hi Sherry,
On 2019-07-17 18:40, sherry sun wrote:
From: Sherry Sun <sherry....@nxp.com>
This patchset adds:
1. Add usb_gadget_initialize() and usb_gadget_release() to initialize
and
release UDC during sdp download.
2. Add high speed endpoint descriptor for sdp.
3. Add a macro definition--CONFIG_SDP_LOADADDR as default sdp load
address while SDP_WRITE and SDP_JUMP command addr is zero.
Sherry Sun (4):
imx: spl: Change USB boot device type
SDP: use CONFIG_SDP_LOADADDR as default load address
SDP: fix wrong usb request size and add high speed endpoint
descriptor
SDP: Call usb_gadget_initialize and usb_gadget_release to support UDC
These changes look like like they target SDP on imx8. For imx8mq is this
all that is required to get SDP working with uuu or are there additional
changes required ?
Thanks
Angus
arch/arm/mach-imx/spl.c | 2 +-
common/spl/spl_sdp.c | 4 ++++
drivers/usb/gadget/Kconfig | 4 ++++
drivers/usb/gadget/f_sdp.c | 39 +++++++++++++++++++++++++++++++++-----
4 files changed, 43 insertions(+), 6 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
