Add needed device-tree nodes to support PCIe 0 and SERDES on AM65x SoC. The nodes are kept disabled by default.
Signed-off-by: Sekhar Nori <nsek...@ti.com> --- arch/arm/dts/k3-am65-main.dtsi | 108 +++++++++++++++++++++++++++++ arch/arm/dts/k3-am65.dtsi | 1 + include/dt-bindings/phy/phy-am654-serdes.h | 13 ++++ 3 files changed, 122 insertions(+) create mode 100644 include/dt-bindings/phy/phy-am654-serdes.h diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index 7d0370605769..0f5da9a563d3 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -5,6 +5,9 @@ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ */ +#include <dt-bindings/phy/phy-am654-serdes.h> +#include <dt-bindings/phy/phy.h> + &cbass_main { gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; @@ -143,4 +146,109 @@ clocks = <&k3_clks 113 1>; power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; }; + + scm_conf: scm_conf@100000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x00100000 0 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x00100000 0x1c000>; + + serdes_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ + <0x4090 0x3>; /* SERDES1 lane select */ + }; + + pcie0_mode: pcie-mode@4060 { + compatible = "syscon"; + reg = <0x00004060 0x4>; + }; + + pcie1_mode: pcie-mode@4070 { + compatible = "syscon"; + reg = <0x00004070 0x4>; + }; + + serdes0_clk: serdes_clk@4080 { + compatible = "syscon"; + reg = <0x00004080 0x4>; + }; + + serdes1_clk: serdes_clk@4090 { + compatible = "syscon"; + reg = <0x00004090 0x4>; + }; + + pcie_devid: pcie-devid@210 { + compatible = "syscon"; + reg = <0x00000210 0x4>; + }; + }; + + serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + mux-controls = <&serdes_mux 0>; + #clock-cells = <1>; + }; + + serdes1: serdes@910000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x910000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; + clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; + assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; + ti,serdes-clk = <&serdes1_clk>; + mux-controls = <&serdes_mux 1>; + #clock-cells = <1>; + }; + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 + 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie0_mode>; + bus-range = <0x0 0xff>; + status = "disabled"; + device_type = "pci"; + num-lanes = <1>; + num-ob-windows = <16>; + num-viewport = <16>; + max-link-speed = <3>; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, /* INT A */ + <0 0 0 2 &pcie0_intc 0>, /* INT B */ + <0 0 0 3 &pcie0_intc 0>, /* INT C */ + <0 0 0 4 &pcie0_intc 0>; /* INT D */ + msi-map = <0x0 &gic_its 0x0 0x10000>; + + pcie0_intc: legacy-interrupt-controller@1 { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; + }; + }; }; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index a3abd146d104..a1467a4dd4d4 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -69,6 +69,7 @@ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, diff --git a/include/dt-bindings/phy/phy-am654-serdes.h b/include/dt-bindings/phy/phy-am654-serdes.h new file mode 100644 index 000000000000..e8d901729ed9 --- /dev/null +++ b/include/dt-bindings/phy/phy-am654-serdes.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for AM654 SERDES. + */ + +#ifndef _DT_BINDINGS_AM654_SERDES +#define _DT_BINDINGS_AM654_SERDES + +#define AM654_SERDES_CMU_REFCLK 0 +#define AM654_SERDES_LO_REFCLK 1 +#define AM654_SERDES_RO_REFCLK 2 + +#endif /* _DT_BINDINGS_AM654_SERDES */ -- 2.16.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot