From: Nevo Hed <nhed+git...@starry.com>

An eralier commit in this changeset is taken from Marvells repos but was
based on an MVMDIO implementation that never made it into U-Boot.  With
this patch the mvpp2 driver switches to use the new MVMDIO driver that is
based on a more universal mdio-uclass implementation.

Signed-off-by: Nevo Hed <nhed+git...@starry.com>
---
 drivers/net/Kconfig |  1 +
 drivers/net/mvpp2.c | 45 ++++++++++-----------------------------------
 2 files changed, 11 insertions(+), 35 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d8c4dd6f4d..81f39d0928 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -298,6 +298,7 @@ config MVPP2
        depends on ARMADA_375 || ARMADA_8K
        select PHYLIB
        select MVMDIO
+       select DM_MDIO
        help
          This driver supports the network interface units in the
          Marvell ARMADA 375, 7K and 8K SoCs.
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 5f908113f2..de1b8fce84 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -32,7 +32,7 @@
 #include <linux/mbus.h>
 #include <asm-generic/gpio.h>
 #include <fdt_support.h>
-#include <mdio.h>
+#include <linux/mdio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -936,7 +936,6 @@ struct mvpp2_port {
 
        /* Per-port registers' base address */
        void __iomem *base;
-       void __iomem *mdio_base;
 
        struct mvpp2_rx_queue **rxqs;
        struct mvpp2_tx_queue **txqs;
@@ -958,7 +957,7 @@ struct mvpp2_port {
        struct phy_device *phy_dev;
        phy_interface_t phy_interface;
        int phyaddr;
-       struct mii_dev *bus;
+       struct udevice *mdio_dev;
 #ifdef CONFIG_DM_GPIO
        struct gpio_desc phy_reset_gpio;
        struct gpio_desc phy_tx_disable_gpio;
@@ -4482,8 +4481,8 @@ static void mvpp2_phy_connect(struct udevice *dev, struct 
mvpp2_port *port)
        struct phy_device *phy_dev;
 
        if (!port->init || port->link == 0) {
-               phy_dev = phy_connect(port->bus, port->phyaddr, dev,
-                                     port->phy_interface);
+               phy_dev = dm_mdio_phy_connect(port->mdio_dev, port->phyaddr,
+                                             dev, port->phy_interface);
 
                /* If the phy doesn't match with any existing u-boot drivers the
                 * phy framework will connect it to generic one which
@@ -4708,24 +4707,18 @@ static int phy_info_parse(struct udevice *dev, struct 
mvpp2_port *port)
        int phy_mode = -1;
        int ret;
 
-       /* Default mdio_base from the same eth base */
-       if (port->priv->hw_version == MVPP21)
-               port->mdio_base = port->priv->lms_base + MVPP21_SMI;
-       else
-               port->mdio_base = port->priv->iface_base + MVPP22_SMI;
-
        phy_node = fdtdec_lookup_phandle(gd->fdt_blob, port_node, "phy");
 
        if (phy_node > 0) {
-               ofnode phy_ofnode;
-               fdt_addr_t phy_base;
-
+               int parent;
                phyaddr = fdtdec_get_int(gd->fdt_blob, phy_node, "reg", 0);
                if (phyaddr < 0) {
                        dev_err(&pdev->dev, "could not find phy address\n");
                        return -1;
                }
-               ret = mdio_mii_bus_get_from_phy(phy_node, &port->bus);
+               parent = fdt_parent_offset(gd->fdt_blob, phy_node);
+               ret = uclass_get_device_by_of_offset(UCLASS_MDIO, parent,
+                                                    &port->mdio_dev);
                if (ret)
                        return ret;
        } else {
@@ -5044,7 +5037,7 @@ static int mvpp2_init(struct udevice *dev, struct mvpp2 
*priv)
        return 0;
 }
 
-int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
+static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
 {
        struct mvpp2_port *port = dev_get_priv(dev);
        struct mvpp2_rx_desc *rx_desc;
@@ -5309,31 +5302,13 @@ static int mvpp2_probe(struct udevice *dev)
 {
        struct mvpp2_port *port = dev_get_priv(dev);
        struct mvpp2 *priv = dev_get_priv(dev->parent);
-       struct mii_dev *bus;
        int err;
 
        /* Only call the probe function for the parent once */
        if (!priv->probe_done)
                err = mvpp2_base_probe(dev->parent);
 
-       port->priv = dev_get_priv(dev->parent);
-
-       /* Create and register the MDIO bus driver */
-       bus = mdio_alloc();
-       if (!bus) {
-               printf("Failed to allocate MDIO bus\n");
-               return -ENOMEM;
-       }
-
-       bus->read = mpp2_mdio_read;
-       bus->write = mpp2_mdio_write;
-       snprintf(bus->name, sizeof(bus->name), dev->name);
-       bus->priv = (void *)port;
-       port->bus = bus;
-
-       err = mdio_register(bus);
-       if (err)
-               return err;
+       port->priv = priv;
 
        err = phy_info_parse(dev, port);
        if (err)
-- 
2.21.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to