On 2019/8/2 下午3:40, Matwey V. Kornilov wrote:
Until now, binary TPL by Rockchip has been required for booting
procedure. Starting from this commit we may use only u-boot to boot
the device.
Note, that using binary TPL instead of U-boot TPL is still working.
Signed-off-by: Matwey V. Kornilov <matwey.korni...@gmail.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
configs/rock64-rk3328_defconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index ef453e72c1..6484845fb6 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -34,15 +34,20 @@ CONFIG_CMD_USB=y
CONFIG_CMD_TIME=y
CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent
assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_TPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
+CONFIG_TPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
+CONFIG_TPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
+CONFIG_TPL_CLK=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
@@ -65,6 +70,7 @@ CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
CONFIG_DM_RESET=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
@@ -85,4 +91,12 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y
+CONFIG_TPL_DM=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_TPL_BOOTROM_SUPPORT=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
