> Subject: [PATCH v2 02/11] imx: tpc70: config: Update TPC70 config to support > eMMC's boot0 SPL update > > The TPC70 can boot from eMMC's boot0. This patch allows it to update this > HW partition's SPL. > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > --- > > include/configs/kp_imx6q_tpc.h | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h > index 92f2bbb75b..2d1d1203b5 100644 > --- a/include/configs/kp_imx6q_tpc.h > +++ b/include/configs/kp_imx6q_tpc.h > @@ -43,6 +43,7 @@ > #define CONFIG_SYS_FSL_ESDHC_ADDR 0 > #define CONFIG_SYS_FSL_USDHC_NUM 2 > #define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 > (eMMC) */ > +#define CONFIG_SUPPORT_EMMC_BOOT > > /* UART */ > #define CONFIG_MXC_UART > @@ -103,6 +104,10 @@ > "setexpr blkc ${blkc} + 1;" \ > "mmc write ${loadaddr} 0x2 ${blkc};" \ > "fi;\0" \ > + "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \ > + "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run > upd_uboot_sd\0" \ > + "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \ > + "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \ > "upd_wic=" \ > "if tftp ${loadaddr} ${wic_file}; then " \ > "setexpr blkc ${filesize} / 0x200;" \
Reviewed-by: Peng Fan <peng....@nxp.com> > -- > 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot